Label - Florafert TE Trace Element Mix - 220527
Applies to TE Trace Element Mix
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original product label above for the authoritative version.
FLORAFERT TE PREMIUM TRACE ELEMENT MIX For Containerised Plant Growing Media 0-1-1-4+TE
Product Analysis
| Total Nitrogen (N) | 0.0% | Sulphur (S) Total | 4.4% |
| Phosphorus (P) | 1.0% | Calcium (Ca) | 3.1% |
| as water soluble | 0.0% | Magnesium (Mg) | 1.2% |
| as citrate soluble | 0.8% | Zinc (Zn) | 0.20% |
| as citrate insoluble | 0.2% | Iron (Fe) | 21.9% |
| Potassium (K) Total | 0.6% | Copper (Cu) | 0.63% |
| Boron (B) | 0.11% | ||
| Manganese (Mn) | 0.81% | ||
| Molybdenum (Mo) | 0.04% | ||
| Silica (Si) | 0.04% |
Directions for Use
Ensure the FloraFert TE Mix is blended consistently throughout the growing media.
Recommended Application Rates
| Peat-based Mixes | Bark-based Mixes | |
|---|---|---|
| Container Nursery Stock | 0.25-0.5 kg/m3 | 0.5-1 kg/m3 |
Warning
Use of this product may result in cadmium, mercury and lead residues in excess of the Maximum Permissible Concentration (MPC) in plant and animal products and may result in accumulation of these residues in soils.
Storage Instructions:
- Keep bag sealed once opened or store in an airtight container to preserve efficacy
- Store under cool and dry conditions
20kg Net
Manufactured in Australia and distributed by: Fernland Agencies Pty Ltd 31-35 Paulger Flat Road, Yandina Qld 4561 P: | F: | E: