Label - Jacks Blossom Booster - 1.8kg
Applies to Classic WSF Blossom Booster Fertiliser
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original product label above for the authoritative version.
Jack’s Blossom Booster
Water Soluable Fertiliser
10-12.9-16.6+Te
Product Number: 51644 NET WT. 1.81KG
Guaranteed Analysis
| Nutrient | Amount |
|---|---|
| Total nitrogen (N) | 10% |
| 5.00% ammoniacal nitrogen | |
| 5.00% nitrate nitrogen | |
| Available phosphate (P2O5) (30%) | 12.9% |
| Soluble potash (K2O) (20%) | 16.6% |
| Magnesium (Mg) | 2.0300% |
| 2.0300% water soluble magnesium (Mg) | |
| Iron (Fe) | 0.0500% |
| 0.0500% chelated iron (Fe) | |
| Molybdenum (Mo) | 0.001% |
Derived from: ammonium nitrate, monopotassium phosphate, magnesium sulfate, boric acid, iron EDTA, manganese EDTA, zinc EDTA, copper EDTA, ammonium molybdate Potential Acidity: 347 lb. Calcium carbonate equivalent per ton. Information regarding the contents and levels of metals in this product is available on the internet at:
!!Warning Statements!!
Do not swallow. The dust from this product may act as an irritant. Avoid inhalation and contact with the eyes and skin. Excessive use of molybdenum (Mo) can be harmful to stock. Plant levels of Mo can be high for 4 weeks after application. It is advisable to keep stock off treated areas for this period. Molybdenum application may induce copper deficiency in grazing animals. This is most likely to occur on sandy soils low in copper. Check rate and frequency of molybdenum use with appropriate authorities.
For best results, use warm water to dissolve product. Jack’s fertilizers are made with 100% soluble raw materials that will form a true solution. Some raw materials are slower to dissolve than others. Keep stock tank covered to reduce light and debris inputs.
Small Volume Application Ornamentals: 1-2g/L (applied to foliage & soil) every 7-10 days or as required.
Distributed in Australia by: Fernland Agencies Pty Ltd
Jack’s Blossom Booster
Water Soluable Fertiliser
10-12.9-16.6+Te
Product Number: 51644 NET WT. 1.81KG
Guaranteed Analysis
| Nutrient | Amount |
|---|---|
| Total nitrogen (N) | 10% |
| 5.00% ammoniacal nitrogen | |
| 5.00% nitrate nitrogen | |
| Available phosphate (P2O5) (30%) | 12.9% |
| Soluble potash (K2O) (20%) | 16.6% |
| Magnesium (Mg) | 2.0300% |
| 2.0300% water soluble magnesium (Mg) | |
| Iron (Fe) | 0.0500% |
| 0.0500% chelated iron (Fe) | |
| Molybdenum (Mo) | 0.001% |
Derived from: ammonium nitrate, monopotassium phosphate, magnesium sulfate, boric acid, iron EDTA, manganese EDTA, zinc EDTA, copper EDTA, ammonium molybdate Potential Acidity: 347 lb. Calcium carbonate equivalent per ton. Information regarding the contents and levels of metals in this product is available on the internet at:
!!Warning Statements!!
Do not swallow. The dust from this product may act as an irritant. Avoid inhalation and contact with the eyes and skin. Excessive use of molybdenum (Mo) can be harmful to stock. Plant levels of Mo can be high for 4 weeks after application. It is advisable to keep stock off treated areas for this period. Molybdenum application may induce copper deficiency in grazing animals. This is most likely to occur on sandy soils low in copper. Check rate and frequency of molybdenum use with appropriate authorities.
For best results, use warm water to dissolve product. Jack’s fertilizers are made with 100% soluble raw materials that will form a true solution. Some raw materials are slower to dissolve than others. Keep stock tank covered to reduce light and debris inputs.
Small Volume Application Ornamentals: 1-2g/L (applied to foliage & soil) every 7-10 days or as required.
Distributed in Australia by: Fernland Agencies Pty Ltd