Label - Algae Died B - 230929
Applies to Algae Died B | Algae Killer
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original product label above for the authoritative version.
Directions: Algae Died B
Read the product SDS carefully before handling this product. Dosing and methods may vary with the site conditions. Please call us on to discuss your situation in more detail.
| Situation | Control | Rate of Application | General Instructions |
|---|---|---|---|
| Spa Therapeutic pools | Algae Bacteria Black spot | Initial treatment: 200ml per 10,000L of water Preventative Maintenance: (weekly to monthly) 200ml per 10,000L of water. | Use in conjunction with regular chlorine treatment. Treatment may reduce chlorine usage, corrosive and irritating effects. For spa baths, use in conjunction with a cleaning product such as Chemron Spa Bath Treatment. |
| Swimming pools | Algae Bacteria Black spot | Summer Dosage: Initial Treatment: 250ml per 10,000L of water. Weekly to monthly: 170ml per 10,000L of water. Initial treatment or heavy algae control: 600ml per 10,000L of water. Monthly winter Dosage: One dose of 600ml per 10,000L of water. | Calculate the volume of a pool by multiplying the length x width x depth of the pool in metres x 1000 to give the volume in litres. |
| Air conditioning Water | Algae Bacteria Slime | Initial Treatment: 1L per 10,000L of water. Maintenance: 200ml per 10,000L of water. | Dose to the tank. Clear dead algae if present. Complete hygienic treatment is achieved when Algae- Died B is used in conjunction with a sodium hypochlorite solution. |
| Bowling greens, Golf greens Bunkers General turf areas | Algae Moss Slime | Initial Dose: 1L of Algae-Died B to 100L of water. | Apply the mixture evenly over the entire green and allow to dry |
| Sea pools Boat ramps Pathways | Algae Moss Slime | 1L – 2L of Algae-Died B to 100L of water. | Use after pre-cleaning treatment such as Chemron Farm Mate or Power Kleen (change to degreaser and cleaner) Clean surface with high-pressure water. Allow work area to drain, preferably to dry. Apply Algae Died B to the surface using a sprayer or airless foaming gun: Allow to dry. In tidal conditions allow 30+ minutes dwell time before tidal surge |
| General | 30ml of Algae Died B per 5L water | Do not rinse treated surfaces | |
| Walls, floors, masonry, fibro, coated surfaces etc. | 1L – 2L of Algae-Died B to 100L of water. | Clean surface with high-pressure water. Allow work area to drain, preferably to dry. Apply Algae Died B to cleaned surface using a sprayer or airless foaming gun. Allow to dry, do not rinse | |
| Piggeries | hatcheries, Dairies | kennels | Bacteria Algae Moss |
Causes severe skin burns and eye damage.
Caution
Keep out of reach of children Read safety directions before opening
Algae Died B
Emergency telephone number: In a transport emergency dial 000 Police or Fire Brigade
SAFETY: Keep away from heat and flames. Do not inhale. Wear gloves and protective clothing when handling in bulk. Keep container tightly closed.
FIRST AID: If poisoning occurs, contact a doctor or Poisons Information Centre (Australia 13 11 26, New Zealand 0800 764 766) and have this label to hand. If swallowed, do not induce vomiting; instead provide a glass of water. If in eyes, flood with water for at least 15 minutes. If on skin, wash skin and clothing thoroughly.
SPILLS & LEAKS: Clear area of all unprotected personnel. Slippery when spilt. Wear protective equipment. Absorb with sand or soil. Collect and seal in properly labelled drums. Refer to State/Territory Land Waste Management Authority for disposal.
FIRE: If material is involved in a fire use water fog (or if unavailable fine water spray), foam, dry agent (carbon dioxide, dry chemical powder).
DO NOT REUSE CONTAINER UNLESS THOROUGHLY DECONTAMINATED. SEE THE SAFETY DATA SHEET FOR ADDITIONAL INFORMATION
UN No: 1760 CORROSIVE LIQUID, N.O.S. (QUATERNARY AMMONIUM COMPOUND) CONTAINS: 10-30% QUATERNARY AMMONIUM COMPOUNDS, ALKYLBENZYLDIMETHYL, CHLORIDES.
[Diagram: Corrosive symbol - a hand and a metal surface being corroded by a liquid]