SDS - Nufarm Bond Adjuvant - 250429

SAFETY DATA SHEET BOND ADJUVANT Infosafe No.: NU04B ISSUED Date : 29/04/2025 ISSUED by: NUFARM AUSTRALIA LIMITED.

Section 1 - Identification

Product Identifier BOND ADJUVANT

Product Code 3345

Company Name NUFARM AUSTRALIA LIMITED. ()

Address 103-105 Pipe Road Laverton North Victoria 3026 AUSTRALIA

Telephone/Fax Number

Emergency Phone Number (24hr Australia)

Emergency Contact Name

E-mail Address

Recommended use of the chemical and restrictions on use Bond is a true sticker, extender providing superior sticking abilities and extending the life of your agricultural chemicals. Bond helpsto regulate droplet size and reduces drift, allowing a more uniform spray pattern.

Other Information This Safety Data Sheet describes the properties of the concentrated product. The physical properties and the assessments may not apply to the properties of the product once it has been diluted for application

Section 2 - Hazard(s) Identification

GHS classification of the substance/mixture Classified as Hazardous according to the Globally Harmonised System of Classification and labelling of Chemicals (GHS) including Work, Health and Safety regulations, Australia. Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. (7th edition) Eye damage/irritation: Category 2A

Signal Word (s) WARNING

Hazard Statement (s) H319 Causes serious eye irritation.

Pictogram (s) Exclamation mark

[Image of Exclamation mark pictogram]

Precautionary Statement–Prevention P264 Wash skin thoroughly after handling. P280 Wear eye protection/face protection.

Precautionary Statement–Response P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention.

Section 3 - Composition and Information on Ingredients

Ingredients

Section 4 - First Aid Measures

Inhalation If inhaled, remove affected person from contaminated area. Keep at rest until recovered. If symptoms develop and/or persist seek medical attention.

Ingestion Do not induce vomiting. Wash out mouth thoroughly with water. Seek immediate medical attention.

Skin Wash affected area thoroughly with soap and water. If symptoms develop seek medical attention.

Eye If in eyes, hold eyelids apart and flush the eyes continuously with running water. Remove contact lenses. Continue flushing for several minutes until all contaminants are washed out completely. Seek medical attention.

First Aid Facilities Eyewash, safety shower and normal washroom facilities.

Advice to Doctor Treat symptomatically.

Other Information For advice in an emergency, contact a Poisons Information Centre (Phone Australia 131 126) or a doctor at once.

Section 5 - Firefighting Measures

Suitable Extinguishing Media Water fog or spray, foam, carbon dioxide or dry chemical.

Unsuitable Extinguishing Media Water jet

Hazards from Combustion Products Under fire conditions this product may emit toxic and/or irritating fumes, smoke and gases including carbon monoxide, carbon dioxide and oxides of nitrogen.

Specific hazards arising from the chemical This product will burn if exposed to fire.

Decomposition Temperature Not available

Precautions in connection with Fire Fire fighters should wear Self-Contained Breathing Apparatus (SCBA) operated in positive pressure mode and full protective clothing to prevent exposure to vapours or fumes. Water spray may be used to cool down heat-exposed containers. Fight fire from safe location. This product should be prevented from entering drains and watercourses.

Section 6 - Accidental Release Measures

Emergency Procedures Wear appropriate personal protective equipment and clothing to prevent exposure. Extinguish or remove all sources of ignition and stop leak if safe to do so. Increase ventilation. Evacuate all unprotected personnel. If possible contain the spill. Place inert absorbent, non-combustible material onto spillage. Use clean non-sparking tools to collect the material and place into suitable labelled containers for subsequent recycling or disposal. Dispose of waste according to the applicable local and national regulations. If contamination of sewers or waterways occurs inform the local water and waste management authorities in accordance with local regulations.

Section 7 - Handling and Storage

Precautions for Safe Handling Avoid inhalation of vapours and mists, and skin or eye contact. Use only in a well ventilated area. Keep containers sealed when not in use. Prevent the build up of mists or vapours in the work atmosphere. Do not use near ignition sources. Do not pressurise, cut, heat or weld containers as they may contain hazardous residues. Maintain high standards of personal hygiene by washing hands prior to eating, drinking, smoking or using toilet facilities. After use and before eating, drinking or smoking, wash hands, arms and face thoroughly with soap and water.

Conditions for safe storage, including any incompatibilities Store in a cool, dry, well-ventilated area away from sources of ignition, foodstuffs, clothing and incompatible materials such as oxidising agents. Keep containers closed when not in use, securely sealed and protected against physical damage. Inspect regularly for deficiencies such as damage or leaks. Have appropriate fire extinguishers available in and near the storage area. Take precautions against static electricity discharges. Use proper grounding procedures. Ensure that storage conditions comply with applicable local and national regulations. For information on the design of the storeroom, reference should be made to Australian Standard AS1940 - The storage and handling of flammable and combustible liquids.

Section 8 - Exposure Controls and Personal Protection

Occupational exposure limit values No exposure standards have been established for the mixture. However, over-exposure to some chemicals may result in enhancement of pre-existing adverse medical conditions and/or allergic reactions and should be kept to the least possible levels.

Biological Monitoring No biological limits allocated.

Control Banding Not available

Engineering Controls This substance is hazardous and should be used with a local exhaust ventilation system, drawing vapours away from workers' breathing zone. A flame-proof exhaust ventilation system is required. If the engineering controls are not sufficient to maintain concentrations of vapours/mists below the exposure standards, suitable respiratory protection must be worn. Refer to relevant regulations for further information concerning ventilation requirements.

Respiratory Protection If engineering controls are not effective in controlling airborne exposure then an approved respirator with a replaceable vapor/mist filter should be used. Refer to relevant regulations for further information concerning respiratory protective requirements. Reference should be made to Australian Standards AS/NZS 1715, Selection, Use and Maintenance of Respiratory Protective Devices; and AS/NZS 1716, Respiratory Protective Devices, in order to make any necessary changes for individual circumstances.

Eye and Face Protection Safety glasses with side shields, chemical goggles or full-face shield as appropriate should be used. Final choice of appropriate eye/face protection will vary according to individual circumstances. Eye protection devices should conform to relevant regulations. Eye protection should conform with Australian/New Zealand Standard AS/NZS 1337 (series) - Eye Protectors for Industrial Applications.

Hand Protection Wear gloves of impervious material such as elbow length PVC. Final choice of appropriate gloves will vary according to individual circumstances. i.e. methods of handling or according to risk assessments undertaken. Occupational protective gloves should conform to relevant regulations. Reference should be made to AS/NZS 2161.1: Occupational protective gloves - Selection, use and maintenance.

Thermal Hazards No further relevant information available.

Body Protection Suitable protective workwear, e.g. cotton overalls buttoned at neck and wrist is recommended. Chemical resistant apron is recommended where large quantities are handled. When opening the container, preparing spray and using the prepared spray wear cotton overalls buttoned to the neck and wrist and a washable hat, elbow-length PVC gloves and goggles. After each day's use, wash contaminated clothing and safety equipment.

Section 9 - Physical and Chemical Properties

Section 10 - Stability and Reactivity

Reactivity Reacts with incompatible materials.

Chemical Stability Stable under normal conditions of storage and handling.

Possibility of hazardous reactions Excess free metallic ions may cause coagulation. Will coagulate under low pH conditions.

Conditions to Avoid Heat, open flames and other sources of ignition.

Incompatible Materials Strong oxidising agents.

Hazardous Decomposition Products Under fire conditions this product may emit toxic and/or irritating fumes, smoke and gases including carbon monoxide, carbon dioxide and oxides of nitrogen.

Hazardous Polymerization Hazardous polymerization is not possible.

Section 11 - Toxicological Information

Toxicology Information Toxicity data available for this material is given below.

Acute Toxicity - Oral LD50 (rat): >5,000 mg/kg

Acute Toxicity - Dermal LD50 (rabbit): >2,000 mg/kg

Acute Toxicity - Inhalation LC50 (rat): 4.73 mg/L/4h

Ingestion Ingestion of this product may irritate the gastric tract causing nausea and vomiting.

Inhalation Inhalation of product vapours may cause irritation of the nose, throat and respiratory system. Breathing high concentrations of vapor or aerosol may cause nausea and irritation of the nose, throat and respiratory system. Respiratory symptoms associated with pre-existing respiratory and lung disorders such as bronchitis, emphysaema and asthma may be aggravated by exposure.

Skin May be irritating to skin. The symptoms may include redness, itching and swelling. If allowed to remain on the skin without rinsing off, may form a thin film. Removal of this thin film may cause slight irritation.

Eye Causes serious eye irritation. On eye contact this product will cause tearing, stinging, blurred vision, and redness.

Respiratory Sensitisation Not expected to be a respiratory sensitiser.

Skin Sensitisation Not expected to be a skin sensitiser.

Germ Cell Mutagenicity Not considered to be a mutagenic hazard.

Carcinogenicity Not considered to be a carcinogenic hazard.

Reproductive Toxicity Not considered to be toxic to reproduction.

STOT - Single Exposure Not expected to cause toxicity to a specific target organ.

STOT - Repeated Exposure Not expected to cause toxicity to a specific target organ.

Aspiration Hazard Not expected to be an aspiration hazard.

Section 12 - Ecological Information

Ecotoxicity The available ecological data is given below.

Persistence and degradability Not available

Mobility Not available

Bioaccumulative Potential Not available

Other Adverse Effects Not available

Environmental Protection Prevent this material entering waterways, drains and sewers.

Acute Toxicity - Fish LC50 (rainbow trout): 190 mg/L/96h

Acute Toxicity - Daphnia EC50 (Daphnia): 5.2 mg/L/24h

Acute Toxicity - Algae EC50 (Selenastrum capricornatum): >100 mg/L/96h

Hazardous to the Ozone Layer This product is not expected to deplete the ozone layer.

Section 13 - Disposal Considerations

Disposal Considerations Dispose of waste according to applicable local and national regulations. Do not allow into drains or watercourses or dispose of where ground or surface waters may be affected. Wastes including emptied containers are controlled wastes and should be disposed of in accordance with all applicable local and national regulations. To minimise personal exposure, refer to Section 8 - Exposure Controls and Personal Protection.

Product Disposal On site disposal of the concentrated product is not acceptable. Ideally, the product should be used for its intended purpose. If there is a need to dispose of the product, approach local authorities who hold periodic collections of unwanted chemicals (ChemClear®).

Container Disposal and Methods Do not use this container for any other purpose. drumMUSTER is the national program for the collection and recycling of empty, cleaned, non returnable crop production and on-farm animal health chemical containers. If the label on your container carries the drumMuster symbol, triple rinse the container, ring your local Council, and offer the container for collection in the program. Returnable containers: empty contents fully into application equipment. Replace cap, close all valves and return to the point of supply for refill or storage. Empty containers and product should not be burnt. Triple or preferably pressure rinse containers before disposal. Add rinsings to the spray tank. If recycling, replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and deliver empty packaging for appropriate disposal at an approved waste management facility. If an approved waste management facility is not available, bury the empty packaging 500mm below the surface in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots, in compliance with relevant local, state or territory government regulations.

Section 14 - Transport Information

Transport Information Road and Rail Transport (ADG Code): Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG Code) (7th edition).

Marine Transport (IMO/IMDG): Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea.

Air Transport (ICAO/IATA): Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air.

UN Number None Allocated

Proper Shipping Name None Allocated

Transport Hazard Class None Allocated

Special Precautions for User Not available

IMDG Marine pollutant No

Transport in Bulk Not available

Additional Information It is good practice not to transport agricultural chemical products with food, food related materials and animal feedstuffs.

Section 15 - Regulatory Information

Regulatory Information Classified as Hazardous according to the Globally Harmonised System of Classification and Labelling of Chemicals (GHS) including Work, Health and Safety Regulations, Australia. Not classified as a Scheduled Poison according to the Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP). Australia: WHS regulations (2011) - Schedule 11: classification not listed.

Poisons Schedule Not Scheduled

Montreal Protocol Not listed

Stockholm Convention Not listed

Rotterdam Convention Not listed

International Convention for the Prevention of Pollution from Ships (MARPOL) Not available

APVMA product number: 41518. This product is registered with the Australian Pesticides and Veterinary Medicines Authority (APVMA).

Basel Convention Not listed

Section 16 - Any Other Relevant Information

Date of Preparation SDS Revised: April 2025 Supersedes: April 2020

Version Number 2.0

Literature References Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice. Standard for the Uniform Scheduling of Medicines and Poisons. Australian Code for the Transport of Dangerous Goods by Road & Rail. Work Health and Safety Regulations, Schedule 10: Prohibited carcinogens, restricted carcinogens and restricted hazardous chemicals. Code of Practice for Supply Diversion into Illicit Drug Manufacture. National Code of Practice for Chemicals of Security Concern. Agricultural Compounds and Veterinary Chemicals Act. International Agency for Research on Cancer (IARC) Monographs. Montreal Protocol on Substances that Deplete the Ozone Layer. Stockholm Convention on Persistent Organic Pollutants (POPs). Rotterdam Convention on the Prior Informed Consent Procedure for Certain Hazardous Chemicals and Pesticides in International Trade. Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal. International Air Transport Association (IATA) Dangerous Goods Regulations. International Maritime Dangerous Goods (IMDG) Code. Workplace exposure standards for airborne contaminants. Adopted biological exposure determinants, American Conference of Industrial Hygienists (ACGIH). Globally Harmonised System of Classification and Labelling of Chemicals (7th revised edition). Code of Practice: Managing Noise and Preventing Hearing Loss at Work.

Contact Person/Point Normal hours: SDS coordinator : Phone After hours: Shift supervisor : Phone

User Codes

END OF SDS

© Copyright Chemical Safety International Pty Ltd Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe SDS displayed is the intellectual property of Chemical Safety International Pty Ltd. Copyright in the layout, presentation and appearance of each Infosafe SDS displayed is the intellectual property of Chemical Safety International Pty Ltd. The compilation of SDS’s displayed is the intellectual property of Chemical Safety International Pty Ltd. Copying of any SDS displayed is permitted for personal use only and otherwise is not permitted. In particular the SDS’s displayed cannot be copied for the purpose of sale or licence or for inclusion as part of a collection of SDS without the express written consent of Chemical Safety International Pty Ltd.