SDS- CC Lonhro 100WG Herbicide - 220731
Applies to Lonhro 100WG Turf Herbicide
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original safety data sheet above for the authoritative version.
Page 1/6 Safety Data Sheet according to WHS Regulations Printing date 31.07.2020 Revision: 31.07.2022
1 Identification Product Name: Campbell Lohnro 100 WG HERBICIDE Other Means of Identification: Mixture Recommended Use of the Chemical and Restriction on Use: Agricultural herbicide
[Diagram: environment symbol]
Aquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects. Signal Word Void Hazard Statements H411 Toxic to aquatic life with long lasting effects. Precautionary Statements P273 Avoid release to the environment. P391 Collect spillage. P501 Dispose of contents/container in accordance with local/regional/national regulations.
3 Composition and Information on Ingredients Chemical Characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions.
Hazardous Components:
| CAS | Name | Classification | Concentration |
|---|---|---|---|
| 144550-36-7 | Iodosulfuron-methyl-sodium | Aquatic Chronic 1, H410 | 9 - 11% |
4 First Aid Measures Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention if breathing problems develop. Skin Contact: In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. If available wash with polyethylene glycol 400. Seek medical attention if symptoms occur. Eye Contact: In case of eye contact, hold eyelids open and rinse with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Seek medical attention if symptoms occur. (Contd. on page 2)
Page 2/6 Safety Data Sheet according to WHS Regulations Printing date 31.07.2020 Revision: 31.07.2022 Product Name: Campbell Lohnro 100 WG HERBICIDE (Contd. of page 1)
Ingestion: If swallowed, do not induce vomiting. Immediately rinse mouth with water. Give a glass of water. Give activated charcoal and sodium sulphate if available. Never give anything by mouth to an unconscious person. Seek immediate medical attention. Symptoms Caused by Exposure: Inhalation: May cause respiratory irritation. Skin Contact: May cause skin irritation. Eye Contact: May cause eye irritation. Ingestion: No adverse health effects expected.
5 Fire Fighting Measures Suitable Extinguishing Media: Water fog, alcohol-resistant foam, dry chemical or carbon dioxide. Do not use full water jet. Specific Hazards Arising from the Chemical: Hazardous combustion products include oxides of carbon, nitrogen and sulphur, hydrogen cyanide, hydrogen chloride and hydrogen iodide. This product is not flammable, but may burn or decompose in a fire. Containers close to fire should be removed if safe to do so. Use water spray to cool fire exposed containers. Special Protective Equipment and Precautions for Fire Fighters: When fighting a major fire wear self-contained breathing apparatus and protective equipment.
6 Accidental Release Measures Personal Precautions, Protective Equipment and Emergency Procedures: Wear approved dust/particulate filter respirator and full protective clothing. Evacuate all non-essential personnel from affected area. Do not breathe dust. Ensure adequate ventilation. Avoid generating dust. Environmental Precautions: In the event of a major spill, prevent spillage from entering drains or water courses. Methods and Materials for Containment and Cleaning Up: Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent material. Collect the spilled material and place into a suitable container for disposal.
7 Handling and Storage Precautions for Safe Handling: Use of safe work practices are recommended to avoid eye or skin contact and inhalation of dust. Food, beverages and tobacco products should not be stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure. Conditions for Safe Storage: Store in a cool, dry and well ventilated area. Keep container tightly closed when not in use. Protect from heat, sparks, open flames and other sources of ignition. Keep away from strong oxidising agents, acids and bases.
8 Exposure Controls and Personal Protection Exposure Standards: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Engineering Controls: Ensure adequate ventilation of the working area. (Contd. on page 3)
Page 3/6 Safety Data Sheet according to WHS Regulations Printing date 31.07.2020 Revision: 31.07.2022 Product Name: Campbell Lohnro 100 WG HERBICIDE (Contd. of page 2)
Respiratory Protection: Where an inhalation risk exists, wear a Class P1 (particulate) respirator. At high dust levels, wear a powered air purifying respirator (PAPR) with Class P3 (Particulate) filter or an air-line respirator or a full-face Class P3 (particulate) respirator. See Australian/New Zealand Standards AS/NZS 1715 and 1716 for more information. Skin Protection: Nitrile rubber gloves. See Australian/New Zealand Standard AS/NZS 2161 for more information. When selecting gloves for use against certain chemicals, the degradation resistance, permeation rate and permeation breakthrough time should be considered. Occupational protective clothing (depending on conditions in which it has to be used, in particular as regards the period for which it is worn, which shall be determined on the basis of the seriousness of the risk, the frequency of exposure to the risk, the characteristics of the workstation of each worker and the performance of the protective clothing). See Australian/New Zealand Standard AS/NZS 4501 for more information. Eye and Face Protection: Eye and face protectors for protection against dust. See Australian/New Zealand Standard AS/NZS 1337 for more information.
9 Physical and Chemical Properties Appearance: Form: Granulate Colour: Light to dark brown Odour: Weak, characteristic Odour Threshold: No information available pH-Value: 7.0 - 8.0 (1%) Melting point/freezing point: No information available Initial Boiling Point/Boiling Range: No information available Flash Point: No information available Flammability: Product is not flammable. Auto-ignition Temperature: 378 °C Decomposition Temperature: No information available Explosion Limits: Lower: No information available Upper: No information available Vapour Pressure: No information available Bulk Density: 0.48 - 0.54 kg/m³ Relative Density: No information available Vapour Density: No information available Evaporation Rate: No information available Solubility in Water: Dispersible Partition Coefficient (n-octanol/water): -0.7 log POW
10 Stability and Reactivity Possibility of Hazardous Reactions: Hazardous polymerisation will not occur. Chemical Stability: Stable at ambient temperature and under normal conditions of use. Conditions to Avoid: Heat, sparks, open flames and other sources of ignition. Incompatible Materials: Strong oxidising agents, acids and bases. Hazardous Decomposition Products: Oxides of carbon, nitrogen and sulphur, hydrogen cyanide, hydrogen chloride and hydrogen iodide. (Contd. on page 4)
Page 4/6 Safety Data Sheet according to WHS Regulations Printing date 31.07.2020 Revision: 31.07.2022 Product Name: Campbell Lohnro 100 WG HERBICIDE (Contd. of page 3)
11 Toxicological Information Toxicity: Acute Health Effects Inhalation: May cause respiratory irritation. Skin: May cause skin irritation. Eye: May cause eye irritation. Ingestion: No adverse health effects expected. Skin Corrosion / Irritation: Based on classification principles, the classification criteria are not met. Serious Eye Damage / Irritation: Based on classification principles, the classification criteria are not met. Respiratory or Skin Sensitisation: Based on classification principles, the classification criteria are not met. Germ Cell Mutagenicity: Based on classification principles, the classification criteria are not met. Carcinogenicity: This product does NOT contain any IARC listed chemicals. Reproductive Toxicity: Based on classification principles, the classification criteria are not met. Specific Target Organ Toxicity (STOT) - Single Exposure: Based on classification principles, the classification criteria are not met. Specific Target Organ Toxicity (STOT) - Repeated Exposure: Based on classification principles, the classification criteria are not met. Aspiration Hazard: Based on classification principles, the classification criteria are not met. Chronic Health Effects: No information available Existing Conditions Aggravated by Exposure: No information available Additional toxicological information: The Australian Acceptable Daily Intake (ADI) for iodosulfuron-methyl-sodium for a human is 0.03 mg/kg/day, set for the public for daily, lifetime exposure. This is based on the NOAEL of 3 mg/kg/day, the level determined to show no effects during long term exposure for the most sensitive indicators and the most sensitive species. (Ref: Australian Pesticides and Veterinary Medicines Authority, 'Acceptable Daily Intakes for Agricultural and Veterinary Chemicals', 2020).
12 Ecological Information Ecotoxicity: Aquatic toxicity: Toxic to aquatic life with long lasting effects. Persistence and Degradability: Not readily biodegradable Bioaccumulative Potential: Bioaccumulation is not expected to occur. Mobility in Soil: Mobile in soils. Other adverse effects: No further relevant information available.
13 Disposal Considerations Disposal Methods and Containers: Dispose according to applicable local and state government regulations. Special Precautions for Landfill or Incineration: Please consult your state Land Waste Management Authority for more information. (Contd. on page 5)
Page 5/6 Safety Data Sheet according to WHS Regulations Printing date 31.07.2020 Revision: 31.07.2022 Product Name: Campbell Lohnro 100 WG HERBICIDE (Contd. of page 4)
14 Transport Information UN Number ADG, IMDG, IATA: UN3077 Proper Shipping Name ADG, IATA: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Iodosulfuron-methyl-sodium) IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Iodosulfuron-methyl-sodium), MARINE POLLUTANT Dangerous Goods Class ADG Class: 9 Miscellaneous dangerous substances and articles. Packing Group: ADG, IMDG, IATA: III Marine pollutant: Yes Symbol (fish and tree) EMS Number: F-A,S-F Hazchem Code: 2Z Special Provisions: 274, 331, 335, 375, AU01 Limited Quantities: 5 kg Packagings & IBCs - Packing Instruction: P002, IBC08, LP02 Packagings & IBCs - Special Packing Provisions: PP12, B3 Portable Tanks & Bulk Containers - Instructions: T1, BK2, BK3 Portable Tanks & Bulk Containers - Special Provisions: TP33
15 Regulatory Information Standard for the Uniform Scheduling of Drugs and Poisons (SUSMP) - Poison Schedule: Poisons Schedule: 5 Australia: Priority Existing Chemicals None of the ingredients is listed.
16 Other Information Date of Preparation or Last Revision: 31.07.2020 Prepared by: Pty Ltd Abbreviations and acronyms: ADG: Australian Dangerous Goods IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals CAS: Chemical Abstracts Service (division of the American Chemical Society) IARC: International Agency for Research on Cancer STEL: Short Term Exposure Limit TWA: Time Weighted Average NES: National Exposure Standard (Safe Work Australia - Workplace Exposure Standards For Airborne Contaminants) Aquatic Chronic 1: Hazardous to the aquatic environment, long-term (Chronic). Category 1 (Contd. on page 6)
Page 6/6 Safety Data Sheet according to WHS Regulations Printing date 31.07.2020 Revision: 31.07.2022 Product Name: Campbell Lohnro 100 WG HERBICIDE (Contd. of page 5)
Aquatic Chronic 2: Hazardous to the aquatic environment, long-term (Chronic). Category 2
Disclaimer This SDS is prepared in accord with the Safe Work Australia document “Code of Practice for the Preparation of Safety Data Sheets for Hazardous Chemicals - May 2018” The information contained in this safety data sheet is provided in good faith and is believed to be accurate at the date of issuance. Colin Campbell (Chemicals) Pty Ltd makes no representation of the accuracy or comprehensiveness of the information and to the full extent allowed by law excludes all liability for any loss or damage related to the supply or use of the information in this material safety data sheet. Pty Ltd is not in a position to warrant the accuracy of the data herein. The user is cautioned to make their own determinations as to the suitability of the information provided to the particular circumstances in which the product is used.