SDS - Elements Black Linemarking Paint - 231129
Applies to ELEMENTS (4:1) Line Marking Paint
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original safety data sheet above for the authoritative version.
[Logo: turfmate INTERNATIONAL - YOUR BEST FRIEND FOR ALL THINGS TURF]
Safety Data sheet according to WHS and ADG requirements Version: 1.1 Issue Date: 29/11/2023
SECTION 1 IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING
| Product Identifier | TURF-BLK10-ELE |
|---|---|
| Product Name | Black Linemarking Elements |
| Synonms | Elements Black |
| Other means of identifications |
RECOMMENDED USE OF THE CHEMICAL AND RESTRICTIONS ON USE Relevant identified uses: Formulated black liquid dispersion specifically designed for linemarking grass
| Company: | Turfmate International |
|---|---|
| Address: | 740 Cranbourne-Frankston Road, Cranbourne South, VIC 3977 |
EMERGENCY PHONE NUMBER
| During working hours AEST | |
|---|---|
| After hours | Contact your local hospital emergency department outside standard working hours. |
Section 2 – HAZARD(S) IDENTIFICATION
Classification of the substance or mixture Classifies as NON-HAZARDOUS SUBSTANCE and NON-DANGEROUS GOODS according to GHS criteria.
| Poisons Schedule | Not Applicable |
|---|---|
| Classification | Not Applicable |
Other Hazards: No specific dangers known or expected during the ordinary course of use. Skin contact irritation possible but not expected. Use with local exhaust ventilation and full PPE such as gloves, eye/face protection.
Label elements
| Hazard pictogram (s) | Not Applicable |
|---|
Section 3 – COMPOSITION / INFORMATION ON INGREDIENTS
SUBSTANCES This product does not contain any components in amounts that would be classified as hazardous under Australian Regulations. All components listed below are on the Australian Inventory of Industrial Chemicals (AIIC).
| NAME | CAS No | % [weight] |
|---|---|---|
| Pigment | Not Available | 40-60 |
| Additives, unregulated | Not Available | <10 |
| Proprientry components no deemed hazardous | Not Available | <10 |
| Water | 7732-18-5 | 20-60 |
Safety Data Sheet Version: 1.1 Page 1 Issue Date: 29/11/2023
Section 4 – FIRST AID MEASURES
Description of First Aid
| INGESTED | Rinse mouth out with plenty of water. If poisoning occurs, contact a doctor or Poisons Information Centre. |
|---|---|
| • If swallowed do NOT induce vomiting. | |
| • If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. | |
| • Observe the patient carefully. | |
| • Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconsciousness | |
| • Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. | |
| • Seek medical advice. | |
| EYES | If this product comes in contact with the eyes: |
| • Immediately hold eyelids apart and flush the eye continuously with running water. | |
| • Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. | |
| • Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. | |
| • Transport to hospital or doctor without delay. | |
| • Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. | |
| SKIN | If solids or aerosol mists are deposited upon the skin: |
| • Flush skin and hair with running water (and soap if available). | |
| • Remove any adhering solids with industrial skin cleansing cream. | |
| • DO NOT use solvents. | |
| • Seek medical attention in the event of irritation. | |
| INHALATION | If fumes or combustion products are inhaled remove from contaminated area. |
| • Lay patient down. Keep warm and rested. | |
| • Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. | |
| • Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. | |
| • Transport to hospital, or doctor. | |
| NOTES TO PHYSICIAN | Treat symptomatically. |
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA Use extinguishing media suitable for surrounding area.
| FIRE INCOMPATIBILITY | None Known |
|---|---|
| HAZCHEM | None |
FIRE FIGHTING • Alert Fire Brigade and tell them location and nature of hazard. • Wear breathing apparatus plus protective gloves for fire only. • Prevent, by any means available, spillage from entering drains or water courses. • Cool fire exposed containers with water spray from a protected location. • Use fire fighting procedures suitable for surrounding area.
FIRE/EXPLOSION HAZARD • The material is not readily combustible under normal conditions. • However, it will break down under fire conditions and the organic component may burn. • Not considered to be a significant fire risk. • Heat may cause expansion or decomposition with violent rupture of containers. • Decomposes on heating and may produce toxic fumes of carbon monoxide (CO). • May emit acrid smoke.
Safety Data Sheet Version: 1.1 Page 2 Issue Date: 29/11/2023
Section 6 - ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES See section 8
ENVIRONMENTAL PRECAUTIONS See section 12
EMERGENCY PROCEDURES
| MINOR SPILLS | • Clean up all spills immediately. |
|---|---|
| • Avoid breathing vapours and contact with skin and eyes. | |
| • Control personal contact by using protective equipment. | |
| • Contain and absorb spill with sand, earth, inert material or vermiculite. | |
| • Wipe up. | |
| • Place in a suitable labelled container for waste disposal. | |
| MAJOR SPILLS | • Clear area of personnel. |
| • Alert Fire Brigade and tell them location and nature of hazard. | |
| • Control personal contact by using protective equipment as required. | |
| • Prevent spillage from entering drains or water ways. | |
| • Contain spill with sand, earth or vermiculite. | |
| • Collect recoverable product into labelled containers for recycling. | |
| • Absorb remaining product with sand, earth or vermiculite and place in appropriate containers for disposal. | |
| • Wash area and prevent runoff into drains or waterways. | |
| • If contamination of drains or waterways occurs, advise emergency services. |
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
| SAFE HANDLING | • Avoid breathing mist and vapour |
|---|---|
| • Limit all unnecessary personal contact. | |
| • Wear protective clothing when risk of exposure occurs. | |
| • Use in a well-ventilated area. | |
| • Avoid contact with incompatible materials. | |
| • When handling, DO NOT eat, drink or smoke. | |
| • Keep containers securely sealed when not in use. | |
| • Avoid physical damage to containers. | |
| • Always wash hands with soap and water after handling. | |
| • Work clothes should be laundered separately. | |
| • Use good occupational work practice. | |
| • Observe manufacturer's storing and handling recommendations. | |
| • Atmosphere should be regularly checked against established exposure standards to ensure safe working conditions are maintained. |
| SUITABLE CONTAINER | • Lined metal can, Lined metal pail/ can |
|---|---|
| • Plastic pail | |
| • Polyliner drum | |
| • Packing as recommended by manufacturer. | |
| • Check all containers are clearly labelled and free from leaks. |
| STORAGE INCOMPATIBILITY | None Known |
|---|---|
| STORAGE REQUIREMENTS | • Store in original containers. |
| • Keep containers securely sealed. | |
| • Store in a cool, dry, well ventilated area. | |
| • DO NOT allow to freeze. | |
| • Store away from incompatible materials. | |
| • Protect containers against physical damage and check regularly for leaks. | |
| • Observe manufacturer's storing and handling recommendations. |
Safety Data Sheet Version: 1.1 Page 3 Issue Date: 29/11/2023
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS No data for House of Paint Mulch Colour Dispersions
PERSONAL PROTECTION
| EYE PROTECTION | • Safety glasses with side shields; or as required, |
|---|---|
| • Chemical goggles. | |
| • Contact lenses pose a special hazard; soft lenses may absorb irritants and all lenses concentrate them. | |
| HANDS AND FEET | Hands: Barrier cream with polyethylene gloves or |
| Wear general protective gloves: Gloves: 1.BUTYL 2.NEOPRENE 3.VITON, with Barrier cream. | |
| Feet: Safety footwear. | |
| RESPIRATORY MEASURES | Respirator: Type AK-P Filter of sufficient capacity |
| OTHER | • Overalls. |
| • Eyewash unit. | |
| • DO NOT spray directly on humans, exposed food or food utensils. |
ENGINEERING CONTROLS None required when handling small quantities. OTHERWISE: Use in a well-ventilated area Spraying to be carried out in conditions conforming to local state regulations. Unprotected personnel must vacate the spraying area. General exhaust is adequate under normal operating conditions. If risk of overexposure exists, wear SAA approved respirator. Correct fit is essential to obtain adequate protection. Provide adequate ventilation in warehouse or closed storage areas.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
| Appearance | Black Liquid mixes with water |
|---|---|
| Physical state | Liquid |
| Colour | Black |
| Odour | Not applicable |
| Molecular Weight | Not applicable |
| Boiling Range (°C) | 100-244 |
| Melting Range (°C) | Not applicable |
| Specific Gravity (water=1) | 1.1-1.3 |
| Solubility in water (g/L) | Soluble |
| pH (1% solution) | 8-8.5 |
| Vapour Pressure (kPa) | <1 |
| Volatile Component (%vol) | 25-60 |
| Evaporation Rate | Slow |
| Relative Vapour Density (air=1) | Not applicable |
| Flash Point (°C) | Non Flammable |
| Lower Explosive Limit (%) | Not applicable |
| Upper Explosive Limit (%) | Not applicable |
| Autoignition Temp (°C) | Not applicable |
| Decomposition Temp (°C) | Not applicable |
| Viscosity (cSt) | Not applicable |
| Taste | Not applicable |
| Surface Tension | Not applicable |
Safety Data Sheet Version: 1.1 Page 4 Issue Date: 29/11/2023
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
| REACTIVITY | No hazardous reactions when handled as prescribed in normal industrial situations. Material is not immediately corrosive to metals and the oxidizing properties are not fire propagating. |
|---|---|
| CHEMICAL STABILITY | This product is stable when stored and handled as prescribed in this Safety Data Sheet. |
| HAZADOUS DECOMPOSITION PRODUCTS: | Thermal decomposition will not occur if used correctly. Carbon dioxide, carbon monoxide hydrocarbon by-products and nitrogen oxides may occur in case of fire. |
Section 11 - TOXICOLOGICAL INFORMATION
INFORMATION ON TOXICOLOGICAL EFFECTS
| POTENTIAL HEALTH EFFECTS | None Known |
|---|---|
| INGESTION | Considered an unlikely route of entry in commercial/industrial environments. The liquid is discomforting and mildly toxic if swallowed. Ingestion may result in nausea, abdominal irritation, pain and vomiting |
| INHALATION | The vapour/mist is mildly discomforting to the respiratory tract and lungs. Inhalation hazard is increased at higher temperatures |
| SKIN CONTACT | The liquid is mildly discomforting to the skin if exposure is prolonged and is capable of causing skin reactions which may lead to dermatitis. The material may accentuate any pre-existing dermatitis condition. The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin. |
| EYE | The liquid is discomforting to the eyes and is capable of causing a mild, temporary redness of the conjunctiva (similar to wind-burn), temporary impairment of vision and/ or other transient eye damage/ulceration The vapour is mildly discomforting to the eyes. The material may produce moderate eye irritation leading to |
| CHRONIC HEALTH EFFECTS | Prolonged or repeated skin contact may cause drying with cracking, irritation and possible dermatitis following. |
Section 12 - ECOLOGICAL INFORMATION
| TOXICITY | No expected damaging effects to aquatic organisms expected based on the physiochemical nature and raw materials of this product. Small levels of APEO based surfactants in this product may have to be taken |
|---|---|
| BIO ACCUMULATIVE POTENTIAL | No adverse effects expected. |
| MOBILITY IN SOIL | No adverse effects expected. |
Section 13- DISPOSAL CONSIDERATIONS
| WASTE TREATMENT METHODS: | • Product must be dumped or incinerated in accordance with local regulations. |
|---|---|
| • Wet sludge must be treated in appropriate waste water treatment plants according to local regulations. | |
| • Empty containers of the dried product may be disposed to landfill, incinerated, or where applicable recycled. | |
| • Observe national and local legal requirements. |
Section 14- TRANSPORTATION INFORMATION
| LABELS REQUIRED | None |
|---|---|
| MARINE POLLUTANT | None |
| HAZCHEM | None |
| UN Number | None |
| Un Proper Shipping Name | None |
| Hazard Class | None |
| Packing Group | None |
| Special precautions for user | None |
Section 15 - REGULATORY INFORMATION
| POISONS SCHEDULE | NONE |
|---|
Safety Data Sheet Version: 1.1 Page 5 Issue Date: 29/11/2023
Section 16 – ANY OTHER RELEVANT INFORMATION
The SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks in the workplace or other settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of
This document has been produced from information supplied by the raw materials suppliers.
Disclaimer: The paint products are manufactured from high-grade materials to rigid specifications. However, it is in the customers best interest to thoroughly test them before adapting them to their own uses. The paint must be used in accordance with the instructions on the relevant technical data sheets and packaging label. Customers must read the manufacturer's standard terms and conditions of sale. All the information provided above is subject to the manufacturer's standard terms and conditions of sale. Every person dealing with the products does so at their own risk.
Safety Data Sheet Version: 1.1 Page 6 Issue Date: 29/11/2023