SDS - FloraTech AquaFlo - 230630

SDS Page 1 of 7

Safety Data Sheet

Version No.: 2.0 ISSUED Date: 30/06/2023

FLORATECH AQUAFLO

1. Identification

GHS Product Identifier FloraTech AquaFlo

Product Code FTCAFLO

Company Name Fernland Agencies Pty Ltd

Address 31-35 Paulger Flat Road, Yandina Qld 4561 Australia

Telephone/Fax Number Telephone: Fax number:

Emergency phone number

E-mail Address

Recommended use of the chemical and restrictions on use Wetting agent for turf

2. Hazard Identification

GHS classification of the substance/mixture Not classified as Hazardous according to the Globally Harmonised System of classification and labelling of chemicals (GHS) including Work, Health and Safety regulations, Australia Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. (7th edition)

3. Composition/information on Ingredients

4. First-aid Measures

Inhalation If inhaled, remove affected person from contaminated area. Keep at rest until recovered. If symptoms develop and/or persist seek medical attention.

Ingestion Do not induce vomiting. Wash out mouth thoroughly with water. Seek medical attention.

---

SDS Page 2 of 7

Skin Wash affected area thoroughly with soap and water. If symptoms develop seek medical attention.

Eye contact If in eyes, hold eyelids apart and flush the eyes continuously with running water. Remove contact lenses. Continue flushing for several minutes until all contaminants are washed out completely. If symptoms develop and/or persist seek medical attention.

First Aid Facilities Eyewash and normal washroom facilities.

Advice to Doctor Treat symptomatically.

Other Information For advice in an emergency, contact a Poisons Information Centre or a doctor at once. (131 126)

5. Fire-fighting Measures

Suitable Extinguishing Media Carbon dioxide, dry chemical, foam, water mist or water spray.

Hazards from Combustion Products Under fire conditions this product may emit toxic and/or irritating fumes, smoke and gases including carbon monoxide, carbon dioxide and oxides of nitrogen.

Specific Hazards Arising From The Chemical This product will burn if exposed to fire.

Hazchem Code None Allocated

Decomposition Temperature Not available

Precautions in connection with Fire Fire fighters should wear Self-Contained Breathing Apparatus (SCBA) operated in positive pressure mode and full protective clothing to prevent exposure to vapours or fumes. Water spray may be used to cool down heat-exposed containers. Fight fire from safe location. This product should be prevented from entering drains and watercourses.

6. Accidental Release Measures

Emergency Procedures Spillage can be slippery. Wear appropriate personal protective equipment and clothing to prevent exposure. Extinguish or remove all sources of ignition and stop leak if safe to do so. Increase ventilation. Evacuate all unprotected personnel. If possible contain the spill. Place inert absorbent, non-combustible material onto spillage. Use clean non-sparking tools to collect the material and place into suitable labelled containers for subsequent recycling or disposal. Dispose of waste according to the applicable local and national regulations. If contamination of sewers or waterways occurs inform the local water and waste management authorities in accordance with local regulations.

7. Handling and Storage

Precautions for Safe Handling Avoid inhalation of vapours and mists, and skin or eye contact. Use only in a well ventilated area. Keep containers sealed when not in use. Prevent the build up of mists or vapours in the work atmosphere. Do not use near ignition sources. Do not pressurise, cut, heat or weld containers as they may contain hazardous residues. Maintain high standards of personal hygiene i.e. washing hands prior to eating, drinking, smoking or using toilet facilities.

Conditions for safe storage, including any incompatibilities Store in a cool, dry, well-ventilated area away from sources of ignition, oxidising agents, strong acids, foodstuffs, and clothing. Keep containers closed when not in use, securely sealed and protected against physical damage. Inspect regularly for deficiencies such as damage or leaks. Have appropriate fire extinguishers available in and near the storage area. Take precautions against static electricity discharges. Use proper grounding procedures. Ensure that storage conditions comply with applicable local and national regulations.

---

SDS Page 3 of 7

For information on the design of the storeroom, reference should be made to Australian Standard AS1940 - The storage and handling of flammable and combustible liquids. Reference should also be made to all applicable local and national regulations.

Storage Regulations Classified as a Class C2 (COMBUSTIBLE LIQUID) for the purpose of storage and handling, in accordance with the requirements of AS1940.

8. Exposure Controls/personal Protection

Occupational exposure limit values No Exposure Limit Established

Biological Limit Values No biological limits allocated.

Appropriate Engineering Controls Provide sufficient ventilation to keep airborne levels below the exposure limits or as low as possible. Where vapours or mists are generated, particularly in enclosed areas, and natural ventilation is inadequate, a flameproof exhaust ventilation system is required. Refer to relevant regulations for further information concerning ventilation requirements. Refer to AS 1940 - The storage and handling of flammable and combustible liquids and AS/NZS 60079.10.1:2009 Explosive atmospheres - Classification of areas - Explosive gas atmospheres, for further information concerning ventilation requirements.

Respiratory Protection If engineering controls are not effective in controlling airborne exposure then an approved respirator with a replaceable vapor/mist filter should be used. Refer to relevant regulations for further information concerning respiratory protective requirements. Reference should be made to Australian Standards AS/NZS 1715, Selection, Use and Maintenance of Respiratory Protective Devices; and AS/NZS 1716, Respiratory Protective Devices, in order to make any necessary changes for individual circumstances.

Eye Protection Safety glasses with side shields, chemical goggles or full-face shield as appropriate should be used. Final choice of appropriate eye/face protection will vary according to individual circumstances. Eye protection devices should conform to relevant regulations. Eye protection should conform with Australian/New Zealand Standard AS/NZS 1337 - Eye Protectors for Industrial Applications.

Hand Protection Wear gloves of impervious material . Final choice of appropriate gloves will vary according to individual circumstances i.e. methods of handling or according to risk assessments undertaken. Occupational protective gloves should conform to relevant regulations. Reference should be made to AS/NZS 2161.1: Occupational protective gloves - Selection, use and maintenance.

Body Protection Suitable protective workwear, e.g. cotton overalls buttoned at neck and wrist is recommended. Chemical resistant apron is recommended where large quantities are handled.

9. Physical and Chemical Properties

Form Liquid

Appearance Clear liquid

Colour Not available

Odour Not available

---

SDS Page 4 of 7

Decomposition Temperature Not available

Melting Point Not available

Freezing Point <0°C

Boiling Point Not available

Solubility in Water Dispersible

Specific Gravity 1.03 (20°C) (approximate)

pH 6-8 (1% aqueous solution)

Vapour Pressure Not available

Vapour Density (Air=1) Not available

Evaporation Rate Not available

Odour Threshold Not available

Viscosity Refer to Section 9: Kinematic Viscosity and Dynamic Viscosity

Volatile Component Not available

Partition Coefficient: n-octanol/water Not available

Flash Point

150°C (Open Cup)

Flammability Not flammable

Auto-Ignition Temperature Not available

Flammable Limits - Lower Not available

Flammable Limits - Upper Not available

Explosion Properties Not available

Oxidising Properties Not available

Kinematic Viscosity Not available

Dynamic Viscosity Not available

10. Stability and Reactivity

Reactivity Refer to Section 10: Possibility of hazardous reactions

Chemical Stability Stable under normal conditions of storage and handling.

Conditions to Avoid Heat, open flames and other sources of ignition.

---

SDS Page 5 of 7

Incompatible materials Strong oxidising agents.

Hazardous Decomposition Products Thermal decomposition may result in the release of toxic and/or irritating fumes including: carbon dioxide and carbon monoxide.

Possibility of hazardous reactions Reacts with incompatible materials.

Hazardous Polymerization Not available

11. Toxicological Information

Toxicology Information No toxicity data available for this material.

Ingestion Ingestion of this product may irritate the gastric tract causing nausea and vomiting.

Inhalation Inhalation of product vapours may cause irritation of the nose, throat and respiratory system.

Skin May be irritating to skin. The symptoms may include redness, itching and swelling.

Eye May be irritating to eyes. The symptoms may include redness, itching and tearing.

Respiratory sensitisation Not expected to be a respiratory sensitiser.

Skin Sensitisation Not expected to be a skin sensitiser.

Germ cell mutagenicity Not considered to be a mutagenic hazard.

Carcinogenicity Not considered to be a carcinogenic hazard.

Reproductive Toxicity Not considered to be toxic to reproduction.

STOT-single exposure Not expected to cause toxicity to a specific target organ.

STOT-repeated exposure Not expected to cause toxicity to a specific target organ.

Aspiration Hazard Not expected to be an aspiration hazard.

12. Ecological Information

Ecotoxicity No ecological data available for this material.

Persistence and degradability Not available

Mobility Not available

Bioaccumulative Potential Not available

Other Adverse Effects Not available

Environmental Protection Prevent this material entering waterways, drains and sewers.

---

SDS Page 6 of 7

13. Disposal Considerations

Disposal considerations The disposal of the spilled or waste material must be done in accordance with applicable local and national regulations.

14. Transport Information

Transport Information Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. (7th edition) Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air. Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea.

U.N. Number None Allocated

UN proper shipping name None Allocated

Transport hazard class(es) None Allocated

Hazchem Code None Allocated

Special Precautions for User Not available

UN Number (Air Transport, ICAO) None Allocated

IATA/ICAO Proper Shipping Name Not dangerous for conveyance under IATA code

IATA/ICAO Hazard Class None Allocated

IMDG UN No None Allocated

IMDG Proper Shipping Name Not dangerous for conveyance under IMO/IMDG code

IMDG Hazard Class None Allocated

IMDG Marine pollutant No

Transport in Bulk Not available

15. Regulatory Information

Regulatory information Not classified as Hazardous according to the Globally Harmonised System of classification and labelling of chemicals (GHS) including Work, Health and Safety regulations, Australia. Not classified as a Scheduled Poison according to the Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP).

Poisons Schedule Not Scheduled

16. Other Information

Date of preparation

---

SDS Page 7 of 7

SDS Created: June 2023

References Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice. Standard for the Uniform Scheduling of Medicines and Poisons. Australian Code for the Transport of Dangerous Goods by Road & Rail. Model Work Health and Safety Regulations, Schedule 10: Prohibited carcinogens, restricted carcinogens and restricted hazardous chemicals. Workplace exposure standards for airborne contaminants. Adopted biological exposure determinants, American Conference of Industrial Hygienists (ACGIH).. Globally Harmonised System of classification and labelling of chemicals.

Contact Person/Point IMPORTANT ADVICE: An MSDS summarizes our best knowledge of the health and safety hazard information of the product and how to safely handle and use the product in the workplace. The information contained in this MSDS is believed to be correct but is not guaranteed. Prior to using the product(s) referred to in this MSDS, each user should read this MSDS and consider the information in the context of how the product will be handled and used in the workplace, including its use in conjunction with other products. If clarification or further information is needed to ensure that an appropriate risk assessment can be made, the user should contact the supplier listed in section 1 of the MSDS. Our responsibility for products sold is subject to our standard terms and conditions, a copy of which is sent to our customers and is also available on request. Fernland does not accept any other liability either directly or indirectly for any losses suffered in connection with the use and application of the product whether or not in accordance with any advice, specification, recommendation or information given by it.