SDS - Syngenta Switch - 210930

SAFETY DATA SHEET

SWITCH

1 / 17

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Product name : SWITCH Design code : A9219B

Manufacturer or supplier's details Company : Syngenta Australia Pty Ltd ()

Address : 2-4 Lyonpark Road Australia

Emergency telephone number : 13 11 26 (Poison Information Centre) (Syngenta)

Telefax :

Recommended use of the chemical and restrictions on use Recommended use : Fungicide

SECTION 2. HAZARDS IDENTIFICATION

Other hazards which do not result in classification May form combustible dust concentrations in air.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance / Mixture : Mixture

Components

SECTION 4. FIRST AID MEASURES

General advice : Have the product container, label or Safety Data Sheet with you when calling the emergency number, a poison control center or physician, or going for treatment.

If inhaled : Move the victim to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep patient warm and at rest. Call a physician or poison control centre immediately.

In case of skin contact : Take off all contaminated clothing immediately. Wash off immediately with plenty of water. If skin irritation persists, call a physician. Wash contaminated clothing before re-use.

In case of eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Immediate medical attention is required.

If swallowed : If swallowed, seek medical advice immediately and show this container or label. Do NOT induce vomiting.

Most important symptoms and effects, both acute and delayed : Nonspecific No symptoms known or expected.

Notes to physician : There is no specific antidote available. Treat symptomatically.

SECTION 5. FIREFIGHTING MEASURES

Suitable extinguishing media : Extinguishing media - small fires Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Extinguishing media - large fires Alcohol-resistant foam or Water spray

Unsuitable extinguishing media : Do not use a solid water stream as it may scatter and spread fire.

Specific hazards during firefighting : Fire will spread by burning with a visible flame. As the product contains combustible organic components, fire will produce dense black smoke containing hazardous products of combustion (see section 10). Exposure to decomposition products may be a hazard to health.

Specific extinguishing methods : Do not allow run-off from fire fighting to enter drains or water courses. Cool closed containers exposed to fire with water spray.

Special protective equipment for firefighters : Wear full protective clothing and self-contained breathing apparatus.

Hazchem Code : 2Z

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures : Refer to protective measures listed in sections 7 and 8. Avoid dust formation.

Environmental precautions : Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.

Methods and materials for containment and cleaning up : Contain spillage, pick up with an electrically protected vacuum cleaner or by wet-brushing and transfer to a container for disposal according to local regulations (see section 13). Do not create a powder cloud by using a brush or compressed air. Clean contaminated surface thoroughly. Clean with detergents. Avoid solvents. Retain and dispose of contaminated wash water.

SECTION 7. HANDLING AND STORAGE

Advice on safe handling : This material is capable of forming flammable dust clouds in air, which, if ignited, can produce a dust cloud explosion. Flames, hot surfaces, mechanical sparks and electrostatic discharges can serve as ignition sources for this material. Electrical equipment should be compatible with the flammability characteristics of this material. The flammability characteristics will be made worse if the material contains traces of flammable solvents or is handled in the presence of flammable solvents. This material can become readily charged in most operations. Avoid contact with skin and eyes. When using do not eat, drink or smoke. For personal protection see section 8.

Conditions for safe storage : Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Keep away from food, drink and animal feedingstuffs.

Further information on storage stability : Physically and chemically stable for at least 2 years when stored in the original unopened sales container at ambient temperatures.

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

Engineering measures : THE FOLLOWING RECOMMENDATIONS FOR EXPOSURE CONTROLS/PERSONAL PROTECTION ARE INTENDED FOR THE MANUFACTURE, FORMULATION AND PACKAGING OF THE PRODUCT. FOR COMMERCIAL APPLICATIONS AND/OR ON-FARM APPLICATIONS CONSULT THE PRODUCT LABEL. Containment and/or segregation is the most reliable technical protection measure if exposure cannot be eliminated. The extent of these protection measures depends on the actual risks in use. Maintain air concentrations below occupational exposure standards. Where necessary, seek additional occupational hygiene advice.

Personal protective equipment

Respiratory protection : No personal respiratory protective equipment normally required. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.

Hand protection Material : Nitrile rubber Break through time : > 480 min Glove thickness : 0.5 mm Remarks : Wear protective gloves. The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Eye protection : No special protective equipment required.

Skin and body protection : Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. Remove and wash contaminated clothing before re-use. Wear as appropriate: Dust impervious protective suit

Protective measures : The use of technical measures should always have priority over the use of personal protective equipment. When selecting personal protective equipment, seek appropriate professional advice. Personal protective equipment should comply with relevant national standards

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : granules Colour : grey to brown Odour : weak Odour Threshold : No data available pH : 9.6 Concentration: 1 % w/v Melting point/range : No data available Boiling point/boiling range : No data available Flash point : No data available Evaporation rate : No data available Flammability (solid, gas) : May form combustible dust concentrations in air. Burning number : 5 (20 °C) 6 (100 °C) Upper explosion limit / Upper flammability limit : No data available Lower explosion limit / Lower flammability limit : No data available Vapour pressure : No data available Relative vapour density : No data available Density : 1 g/cm3 Bulk density : 0.537 g/cm3 Solubility(ies) Water solubility : No data available Solubility in other solvents : No data available Partition coefficient: n-octanol/water : No data available Auto-ignition temperature : No data available Decomposition temperature : No data available Minimum ignition temperature : 600 °C Viscosity Viscosity, kinematic : No data available Explosive properties : Not explosive Oxidizing properties : The substance or mixture is not classified as oxidizing. Self-heating substances : The substance or mixture is not classified as self-heating. Minimum ignition energy : 3 - 10 mJ Particle size : No data available

SECTION 10. STABILITY AND REACTIVITY

Reactivity : None reasonably foreseeable. Chemical stability : Stable under normal conditions. Possibility of hazardous reactions : No dangerous reaction known under conditions of normal use. Conditions to avoid : No decomposition if used as directed. Incompatible materials : None known. Hazardous decomposition products : No hazardous decomposition products are known.

SECTION 11. TOXICOLOGICAL INFORMATION

Exposure routes : Ingestion Inhalation Skin contact Eye contact

Acute toxicity

Product: Acute oral toxicity : LD50 (Rat, male and female): > 5,000 mg/kg Acute inhalation toxicity : LC50 (Rat, male and female): > 2.51 mg/l Exposure time: 4 h Test atmosphere: dust/mist Assessment: The substance or mixture has no acute inhalation toxicity Acute dermal toxicity : LD50 (Rat, male and female): > 2,000 mg/kg Assessment: The substance or mixture has no acute dermal toxicity

Components:

cyprodinil (ISO): Acute oral toxicity : LD50 (Rat, male and female): > 2,000 mg/kg Assessment: The substance or mixture has no acute oral toxicity Acute inhalation toxicity : LC50 (Rat, male and female): > 1.2 mg/l Exposure time: 4 h Test atmosphere: dust/mist Assessment: The substance or mixture has no acute inhalation toxicity Acute dermal toxicity : LD50 (Rat, male and female): > 2,000 mg/kg Assessment: The substance or mixture has no acute dermal toxicity

fludioxonil (ISO): Acute oral toxicity : LD50 (Rat, male and female): > 5,000 mg/kg Acute inhalation toxicity : LC50 (Rat, male and female): > 2.6 mg/l Exposure time: 4 h Test atmosphere: dust/mist Assessment: The substance or mixture has no acute inhalation toxicity Acute dermal toxicity : LD50 (Rat, male and female): > 2,000 mg/kg Assessment: The substance or mixture has no acute dermal toxicity

reaction product of naphthalene, butanol, sulfonated and neutralized by caustic soda: Acute oral toxicity : LD50 (Rat): 1,800 mg/kg Acute inhalation toxicity : LC50 (Rat): 4.08 mg/l Exposure time: 4 h Test atmosphere: dust/mist Acute dermal toxicity : LD50 (Rabbit): 3,000 mg/kg

maleic anhydride: Acute oral toxicity : Assessment: The component/mixture is moderately toxic after single ingestion.

Skin corrosion/irritation

Product: Species : Rabbit Result : No skin irritation

Components:

cyprodinil (ISO): Species : Rabbit Result : No skin irritation

fludioxonil (ISO): Species : Rabbit Result : No skin irritation

maleic anhydride: Result : Corrosive after 3 minutes to 1 hour of exposure

Serious eye damage/eye irritation

Product: Species : Rabbit Result : No eye irritation

Components:

cyprodinil (ISO): Species : Rabbit Result : No eye irritation

fludioxonil (ISO): Species : Rabbit Result : No eye irritation

reaction product of naphthalene, butanol, sulfonated and neutralized by caustic soda: Species : Rabbit Result : Risk of serious damage to eyes.

Respiratory or skin sensitisation

Product: Species : Guinea pig Result : May cause sensitisation by skin contact.

Components:

cyprodinil (ISO): Species : Guinea pig Result : The product is a skin sensitiser, sub-category 1B.

fludioxonil (ISO): Species : Guinea pig Result : Did not cause sensitisation on laboratory animals.

maleic anhydride: Result : May cause sensitisation by inhalation. Result : The product is a skin sensitiser, sub-category 1A.

Chronic toxicity

Germ cell mutagenicity

Components:

cyprodinil (ISO): Germ cell mutagenicity - Assessment : Animal testing did not show any mutagenic effects.

fludioxonil (ISO): Germ cell mutagenicity - Assessment : Animal testing did not show any mutagenic effects.

reaction product of naphthalene, butanol, sulfonated and neutralized by caustic soda: Germ cell mutagenicity - Assessment : In vitro tests did not show mutagenic effects

Carcinogenicity

Components:

cyprodinil (ISO): Carcinogenicity - Assessment : No evidence of carcinogenicity in animal studies.

fludioxonil (ISO): Carcinogenicity - Assessment : No evidence of carcinogenicity in animal studies.

Reproductive toxicity

Components:

cyprodinil (ISO): Reproductive toxicity - Assessment : No toxicity to reproduction

fludioxonil (ISO): Reproductive toxicity - Assessment : No toxicity to reproduction

STOT - single exposure

Components:

reaction product of naphthalene, butanol, sulfonated and neutralized by caustic soda: Assessment : The substance or mixture is classified as specific target organ toxicant, single exposure, category 3 with respiratory tract irritation.

STOT - repeated exposure

Components:

maleic anhydride: Exposure routes : Inhalation Target Organs : Respiratory system Assessment : The substance or mixture is classified as specific target organ toxicant, repeated exposure, category 1.

Repeated dose toxicity

Components:

cyprodinil (ISO): Remarks : No adverse effect has been observed in chronic toxicity tests.

SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity

Product: Toxicity to fish : LC50 (Oncorhynchus mykiss (rainbow trout)): 3.1 mg/l Exposure time: 96 h Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): 0.14 mg/l Exposure time: 48 h Toxicity to algae/aquatic plants : ErC50 (Desmodesmus subspicatus (green algae)): 1.6 mg/l Exposure time: 72 h NOEC (Desmodesmus subspicatus (green algae)): 0.1 mg/l End point: Growth rate Exposure time: 72 h Toxicity to fish (Chronic toxicity) : NOEC (Oncorhynchus mykiss (rainbow trout)): 0.32 mg/l Exposure time: 21 d Test Type: flow-through test Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOEC (Daphnia magna (Water flea)): 0.01 mg/l Exposure time: 22 d

Components:

cyprodinil (ISO): Toxicity to fish : LC50 (Oncorhynchus mykiss (rainbow trout)): 2.41 mg/l Exposure time: 96 h Toxicity to daphnia and other aquatic invertebrates : LC50 (Americamysis): 0.0081 mg/l Exposure time: 96 h Toxicity to algae/aquatic plants : ErC50 (Raphidocelis subcapitata (freshwater green alga)): 5.2 mg/l Exposure time: 72 h NOEC (Raphidocelis subcapitata (freshwater green alga)): 0.4 mg/l End point: Growth rate Exposure time: 72 h EC50 (Skeletonema costatum (marine diatom)): 1.78 mg/l Exposure time: 72 h NOEC (Skeletonema costatum (marine diatom)): 0.541 mg/l Exposure time: 72 h M-Factor (Acute aquatic toxicity) : 100 Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOEC (Daphnia magna (Water flea)): 0.0082 mg/l Exposure time: 21 d NOEC (Americamysis): 0.0019 mg/l Exposure time: 28 d M-Factor (Chronic aquatic toxicity) : 10 Toxicity to microorganisms : EC50 (activated sludge): > 100 mg/l Exposure time: 3 h

fludioxonil (ISO): Toxicity to fish : LC50 (Oncorhynchus mykiss (rainbow trout)): 0.23 mg/l Exposure time: 96 h LC50 (Pimephales promelas (fathead minnow)): 0.7 mg/l Exposure time: 96 h Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): 0.4 mg/l Exposure time: 48 h EC50 (Americamysis): 0.27 mg/l Exposure time: 96 h Toxicity to algae/aquatic plants : ErC50 (Raphidocelis subcapitata (freshwater green alga)): 0.259 mg/l Exposure time: 96 h EC10 (Raphidocelis subcapitata (freshwater green alga)): 0.077 mg/l End point: Growth rate Exposure time: 96 h ErC50 (Skeletonema costatum (marine diatom)): 0.43 mg/l Exposure time: 96 h NOEC (Skeletonema costatum (marine diatom)): 0.14 mg/l End point: Growth rate Exposure time: 96 h Toxicity to fish (Chronic toxicity) : NOEC (Oncorhynchus mykiss (rainbow trout)): 0.04 mg/l Exposure time: 28 d NOEC (Pimephales promelas (fathead minnow)): 0.018 mg/l Exposure time: 116 d Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOEC (Daphnia magna (Water flea)): 0.035 mg/l Exposure time: 21 d NOEC (Americamysis): 0.018 mg/l Exposure time: 28 d Toxicity to microorganisms : EC50 (activated sludge): > 1,000 mg/l Exposure time: 3 h

reaction product of naphthalene, butanol, sulfonated and neutralized by caustic soda: Toxicity to fish : LC50 (Danio rerio (zebra fish)): > 100 mg/l Exposure time: 96 h Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): > 100 mg/l Exposure time: 48 h Remarks: Information given is based on data obtained from similar substances. Toxicity to algae/aquatic plants : EC50 (Raphidocelis subcapitata (freshwater green alga)): > 200 mg/l Exposure time: 72 h Remarks: Information given is based on data obtained from similar substances.

Persistence and degradability

Components:

cyprodinil (ISO): Biodegradability : Result: Not readily biodegradable. Stability in water : Degradation half life: ca. 10 d Remarks: Product is not persistent.

fludioxonil (ISO): Biodegradability : Result: Not readily biodegradable. Stability in water : Degradation half life: 450 - 700 d Remarks: Persistent in water.

silica: Biodegradability : Result: Not readily biodegradable.

reaction product of naphthalene, butanol, sulfonated and neutralized by caustic soda: Biodegradability : Result: Readily biodegradable. Remarks: Information given is based on data obtained from similar substances.

Bioaccumulative potential

Components:

cyprodinil (ISO): Bioaccumulation : Remarks: Does not bioaccumulate. Partition coefficient: n-octanol/water : log Pow: 4.0 (25 °C)

fludioxonil (ISO): Bioaccumulation : Remarks: Does not bioaccumulate. Partition coefficient: n-octanol/water : log Pow: 4.12 (25 °C)

Mobility in soil

Components:

cyprodinil (ISO): Distribution among environmental compartments : Remarks: Cyprodinil has low to slight mobility in soil. Stability in soil : Dissipation time: 0.1 - 2 d Percentage dissipation: 50 % (DT50) Remarks: Product is not persistent.

fludioxonil (ISO): Distribution among environmental compartments : Remarks: immobile Stability in soil : Dissipation time: 14 d Percentage dissipation: 50 % (DT50) Remarks: Product is not persistent.

Other adverse effects

Components:

cyprodinil (ISO): Results of PBT and vPvB assessment : This substance is not considered to be persistent, bioaccumulating and toxic (PBT). This substance is not considered to be very persistent and very bioaccumulating (vPvB).

fludioxonil (ISO): Results of PBT and vPvB assessment : This substance is not considered to be persistent, bioaccumulating and toxic (PBT). This substance is not considered to be very persistent and very bioaccumulating (vPvB).

silica: Results of PBT and vPvB assessment : This substance is not considered to be persistent, bioaccumulating and toxic (PBT). This substance is not considered to be very persistent and very bioaccumulating (vPvB).

SECTION 13. DISPOSAL CONSIDERATIONS

Disposal methods Waste from residues : Do not contaminate ponds, waterways or ditches with chemical or used container. Do not dispose of waste into sewer. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations.

Contaminated packaging : Non-returnable containers: Triple rinse containers. Add rinsings to spray tank If recycling, replace cap and return clean containers to recycler or designated collection point. Containers marked with the drumMUSTER container logo can be taken to a drumMUSTER collection site (, ). Empty containers can be landfilled, when in accordance with the local regulations. If no landfill is available, bury the containers below 500 mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt. Returnable containers: Empty contents fully into application equipment. Close all valves and return to point of supply for refill or storage.

SECTION 14. TRANSPORT INFORMATION

International Regulations

UNRTDG UN number : UN 3077 Proper shipping name : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (CYPRODINIL AND FLUDIOXONIL) Class : 9 Packing group : III Labels : 9

IATA-DGR UN/ID No. : UN 3077 Proper shipping name : Environmentally hazardous substance, solid, n.o.s. (CYPRODINIL AND FLUDIOXONIL) Class : 9 Packing group : III Labels : Miscellaneous Packing instruction (cargo aircraft) : 956 Packing instruction (passenger aircraft) : 956 Environmentally hazardous : yes

IMDG-Code UN number : UN 3077 Proper shipping name : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (CYPRODINIL AND FLUDIOXONIL) Class : 9 Packing group : III Labels : 9 EmS Code : F-A, S-F Marine pollutant : yes

Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable for product as supplied.

National Regulations

ADG UN number : UN 3077 Proper shipping name : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (CYPRODINIL AND FLUDIOXONIL) Class : 9 Packing group : III Labels : 9 Hazchem Code : 2Z Remarks : Environmentally Hazardous Substances meeting the descriptions of UN 3077 or UN 3082 are not subject to the Australian Code for the Transport of Dangerous Goods (ADG). This applies when transported by road or rail in packagings that do not incorporate a receptacle exceeding 500 kg(L) or IBCs per ADG Special Provision AU01.

Special precautions for user The transport classification(s) provided herein are for informational purposes only, and solely based upon the properties of the unpackaged material as it is described within this Safety Data Sheet. Transportation classifications may vary by mode of transportation, package sizes, and variations in regional or country regulations.

SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture Standard for the Uniform Scheduling of Medicines and Poisons : Schedule 5 Prohibition/Licensing Requirements : There is no applicable prohibition, authorisation and restricted use requirements, including for carcinogens referred to in Schedule 10 of the model WHS Act and Regulations. Product Registration Number : APVMA Approval No. 51797

SECTION 16. OTHER INFORMATION

Revision Date : 30.09.2021 Items where changes have been made to the previous version are highlighted in the body of this document by two vertical lines. Date format : dd.mm.yyyy

Full text of other abbreviations ACGIH : USA. ACGIH Threshold Limit Values (TLV) AU OEL : Australia. Workplace Exposure Standards for Airborne Contaminants. ACGIH / TWA : 8-hour, time-weighted average AU OEL / TWA : Exposure standard - time weighted average

AIIC - Australian Inventory of Industrial Chemicals; ANTT - National Agency for Transport by Land of Brazil; ASTM - American Society for the Testing of Materials; bw - Body weight; CMR - Carcinogen, Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for Standardisation; DSL - Domestic Substances List (Canada); ECx - Concentration associated with x% response; ELx - Loading rate associated with x% response; EmS - Emergency Schedule; ENCS - Existing and New Chemical Substances (Japan); ErCx - Concentration associated with x% growth rate response; ERG - Emergency Response Guide; GHS - Globally Harmonized System; GLP - Good Laboratory Practice; IARC - International Agency for Research on Cancer; IATA - International Air Transport Association; IBC - International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal inhibitory concentration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Existing Chemical Substances in China; IMDG - International Maritime Dangerous Goods; IMO - International Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - International Organisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal Concentration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Median Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships; n.o.s. - Not Otherwise Specified; Nch - Chilean Norm; NO(A)EC - No Observed (Adverse) Effect Concentration; NO(A)EL - No Observed (Adverse) Effect Level; NOELR - No Observable Effect Loading Rate; NOM - Official Mexican Norm; NTP - National Toxicology Program; NZIoC - New Zealand Inventory of Chemicals; OECD - Organization for Economic Co-operation and Development; OPPTS - Office of Chemical Safety and Pollution Prevention; PBT - Persistent, Bioaccumulative and Toxic substance; PICCS - Philippines Inventory of Chemicals and Chemical Substances; (Q)SAR - (Quantitative) Structure Activity Relationship; REACH - Regulation (EC) No 1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals; SADT - Self-Accelerating Decomposition Temperature; SDS - Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TDG - Transportation of Dangerous Goods; TECI - Thailand Existing Chemicals Inventory; TSCA - Toxic Substances Control Act (United States); UN - United Nations; UNRTDG - United Nations Recommendations on the Transport of Dangerous Goods; vPvB - Very Persistent and Very Bioaccumulative; WHMIS - Workplace Hazardous Materials Information System

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

AU / EN