A growing advantage
07 5454 8800
Product Label

Label - Acidiphy L

English 217 KB PDF

Applies to AQUA-AID AcidipHy Liquid Irrigation Water Acidifier

Open file Download Print
Open the PDF in a new tab 217 KB · PDF Tap to open the PDF 217 KB · PDF

Document contents

Text extracted from the source document for accessibility and reference. Always consult the original product label above for the authoritative version.

Acidiphy™ L

Irrigation Water Acidifier

EFFECTIVE FOR High pH Soils Calcareous Soils Poor Water Conditions Disease Prevention Pesticide Enhancement Stress Reduction Salt and Bicarbonate Reduction/Management

800-394-1551

Increase Acidity While Reducing Bicarbonates, Sodium, and Soluble Salts

Acidiphy™ L

Irrigation Water Acidifier

AcidipHy Liquid is a unique blend of acidifying agents combined with a surfactant and manganese sulfate. AcidipHy Liquid is designed to be applied either through the irrigation system or in a tank spray. This combination of chemistries is formulated to provide the superintendent with a proactive approach for:

  • Lowering pH of irrigation water and soil profile water
  • Neutralizing the negative effects of high bicarbonate and carbonate levels in irrigation water and the soil solution
  • Maintaining the solubility of Ca and Mg in irrigation and soil water
  • Improving the ability of soil-applied Ca based amendments to produce soluble Ca
  • Dissolving calcium carbonate and magnesium carbonate salts on the surface (crusting) and in the soil profile

AcidipHy Liquid utilizes and/or releases soil nutrients that are present but previously not available to the soil or plants. AcidipHy Liquid lowers the soil and soil solutions pH. AcidipHy Liquid enhances stress resistance by allowing the plant/soil to regain balance and release of nutrients. AcidipHy Liquid provides varying rates to allow for optimal effect based on soil/paste/water test data.

Water and soil samples should be taken and analyzed on a routine basis by a reputable lab. Apply and immediately irrigate to field capacity to flush salts. AcidipHy Liquid may be applied monthly or as necessary to maintain desired salt and bicarbonate levels. Apply at a minimum dilution rate of 50 parts water to 1 part AcidipHy Liquid.

DO NOT combine AcidipHy Liquid in the spray tank with pesticides or fertilizers unless prior use has shown the combination physically compatible, effective and non-injurious under local conditions.

Composition

AcidipHy Liquid is an acidifier used to adjust the pH of irrigation water.

Active Ingredients: 8.5% Hydrochloric acid ** 8.5% Phosphoric acid ** 0.75% Oxalic Acid 3.0% Calcium lignosulfonic acid 1.5% Non-ionic polyol (dispersing agent) 1.0% Manganese Sulfate 76.75% Water

AcidipHy Liquid is available in 55, 30 and 2.5 gallon recyclable containers.*

** Corrosion inhibited *Check with your distributor for availability.

Application Rates

Sprayable Application: Tank mix AcidipHy Liquid at 1 to 4 quarts per acre in a 1 to 2 gallon spray solution per 1000 ft² (3 to 9 L/ha in a 400 to 800 L spray solution). Apply sufficient water to move product into the soil profile.

Irrigation Injection Application: Based on irrigation water hardness, inject AcidipHy Liquid at 1 to 9 gallon in 50 to 450 gallons of water per acre (10 to 85 L/ha in 470 to 4200 L of water) every month or as needed.

Bicarbonate ppm Rate
50 Bicarbonate ppm 1 gal/acre (10 L/ha)
100 Bicarbonate ppm 2 gal/acre (20 L/ha)
200 Bicarbonate ppm 4 gal/acre (37 L/ha)
300 Bicarbonate ppm 6 gal/acre (55 L/ha)
400 Bicarbonate ppm 8 gal/acre (75 L/ha)
450 Bicarbonate ppm 9 gal/acre (85 L/ha)

AQUA·AID 5484 S. Old Carriage Road Rocky Mount, NC 27803 800-394-1551 • 252-937-4107