Document contents

Text extracted from the source document for accessibility and reference. Always consult the original technical sheet above for the authoritative version.

Plantacote® pluss 4M 14-3.9-12.5+1.2Mg+TE Product Information

Nutrient Composition


14 %	N	Total nitrogen
		6.3 % N Nitric nitrogen
		7.7 % N Ammoniacal nitrogen
3.9 %	P	Phosphorus soluble in neutral ammonium citrate and in water. 3.1 % P soluble in water
12.5 %	K	Potassium soluble in water
1.2 %	Mg	Magnesium Total
4 %	S	Sulfur soluble in water
0.03 %	B	Boron
0.02 %	Cu	Copper
0.4 %	Fe	Iron 0.2 % chelated by EDTA
0.1 %	Mn	Manganese
0.02 %	Mo	Molybdenum
0.05 %	Zn	Zinc
		Low in chlorine

Product Description

Plantacote® Pluss 4M is a controlled release fertilizer, coated with an outstanding tough and resilient polymer coating. Each granule contains all major and trace elements which are necessary for an optimal growth.

The nutrients supply coincides with the physiological requirements of the crop over the entire crop cycle of 4 months. The release is based on a natural membrane process which is only controlled by soil temperature. Declared release times refer to an average soil temperature of 21 °C. Higher temperatures accelerate the nutrient release, lower temperatures slow it down. In comparison to slow release fertilizers the release time is unaffected by substrate type, pH, micro-organisms or level of irrigation.

Plantacote® Pluss 4M starts to release after 1 - 2 weeks. Due to this specific mechanism the product is very safe to crops; there is no risk of salt stress, even after storage of premixed growing media for up to 1 - 2 weeks.

The Advantages of Plantacote®

Homogenous product, each granule contains all essential nutrients (NPK+ trace elements)
Regular and continuous release over the declared longevity
Optimal plant growth
High nutrient use efficiency
Environmentally friendly due to reduction of volatilization and run-off
Ultra-safe coating: no risk of cracks and breaks during handling and mixing
Strict quality control to guarantee a consistent product in each bag
Savings on labor and nutrient inputs

Product Properties:

Longevity: 3-4 months (at 21°C soil temperature) Packaging: 25 kg in plastic bag Appearance: beige-coloured granules Bulk density (kg/l): approx. 1.0 Particle size: 2 - 4 mm

[Image: A 25kg bag of Plantacote Pluss 4M]

Highest Safety for your Crops and Profits

Plantacote® pluss 4M 14-3.9-12.5+1.2Mg+TE Product Information

Recommendations for Use

For stock fertilization of substrates, Plantacote® Pluss should be evenly mixed with the substrate before planting. In case of topdressing the granules should be evenly spread on container or bed surface. Due to its safe release Plantacote® Pluss is well suited for dibbling. Additions to the substrate (e.g. lime) do not affect the product efficiency.

The indicated rates refer to unfertilized growing media. Otherwise the recommended rates of Plantacote® Pluss 4M should be reduced accordingly.

For more detailed information please contact your Plantacote® advisor.

Rate of Use

	Sensitive species	Medium species	Vigorous species
Container Nursery Stock	1.5-2.0 g/l	2.0-2.5 g/l	2.5-3.0 g/l
Pot Plants	2.0-3.0 g/l	3.0-4.0 g/l	4.0-5.0 g/l
Bedding Plants/Annuals	2.0-2.5 g/l	2.5-3.5 g/l	3.5-4.5 g/l
Hanging Baskets, Tubs, etc.		3.5-4-0 g/l
Flower Beds		50-80 g/m²

Longevity Depends on Temperature

Average soil temperature	15/16°C	20/21°C	26/27°C
Longevity	4-5 months	3-4 months	2-3 months

Precautions:

Store in a cool and dry place. The recommendations given here are of a general nature only. Carefully consult the special instructions for use before applying the product especially in tunnels and greenhouses as well as under dark foil.

[Images: Three photos showing various plants in pots and flower beds]

Plantacote N.V. Houtdok-Noordkaai 25a 2030 Antwerp - Belgium

Australian Distributor: Fernland A GROWING ADVANTAGE Freecall:

Are you sure?

Label - Plantacote Pluss 4mth Controlled Release Fertiliser