SDS - FloraTech Elevate - 260408
Applies to Elevate | Microbial Inoculant & Biostimulant
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original safety data sheet above for the authoritative version.
SAFETY DATA SHEET FloraTech Elevate — Fernland Agencies Pty Ltd Prepared in accordance with the Work Health and Safety Regulations and GHS Revision 7 (Globally Harmonized System, 7th Revised Edition)
Floratech Elevate
| Date of Issue: | 8 April 2026 |
| Version: | 1.0 |
Section 1: Identification of the Substance/mixture and of the Company/undertaking
1.1 Product Identifier
| Product Name: | FloraTech Elevate |
| Substance / Mixture: | Mixture |
| Other Names: | FloraTech Elevate Microbial Inoculant and Biostimulant Powder |
1.2 Relevant Identified Uses and Uses Advised Against
| Identified Uses: | Microbiological product for use in agriculture, horticulture, and turf management. |
| Uses Advised Against: | The product should not be used in ways other than those referred to in this section. |
| Company Name: | Fernland Agencies Pty Ltd |
| ABN: | 89 144 613 936 |
| Address: | 31-35 Paulger Flat Road, Yandina QLD 4561, Australia |
1.4 Emergency Telephone Number
| Emergency Contact: | (business hours) |
| Poisons Information Centre: | 13 11 26 (24 hours, 7 days) |
| Emergency Services: | 000 |
Section 2: Hazards Identification
2.1 Classification of the Substance or Mixture
Classification in accordance with the Globally Harmonized System of Classification and Labelling of Chemicals (GHS 7) as adopted under the WHS Regulations: The mixture is not classified as hazardous according to the criteria of the WHS Regulations (Australia) and GHS Revision 7.
2.2 Label Elements
Not required — product is not classified as hazardous.
2.3 Other Hazards
The substance does not meet the criteria for PBT or vPvB. The mixture does not contain substances with endocrine-disrupting properties. Prolonged or repeated exposure to dust may cause irritation to the eyes, skin, and respiratory tract.
Section 3: Composition/information on Ingredients
3.2 Mixtures
Mixture of substances and additives as specified below.
| CAS Number | Ingredient | Proportion (% w/w) | GHS Classification |
|---|---|---|---|
| 14431-43-7 | D-glucose | < 95 | Not classified as hazardous |
| — | Microorganisms (non-pathogenic fungi) | < 5 | Not classified as hazardous |
Ingredients are listed in descending order by mass. No ingredient contributes to a hazardous classification under the WHS Regulations.
Section 4: First Aid Measures
4.1 Description of First Aid Measures
- Inhalation: Remove person from exposure. Move to fresh air. If symptoms persist, seek medical attention.
- Skin Contact: Wash affected area with soap and water. Remove contaminated clothing. If irritation develops, seek medical advice.
- Eye Contact: Rinse eyes immediately with plenty of running water for at least 15 minutes, holding eyelids open. Remove contact lenses if present and easy to do. Seek medical attention if irritation persists.
- Ingestion: Rinse mouth with clean water. Do not induce vomiting. Seek medical attention if symptoms develop.
4.2 Most Important Symptoms and Effects, Both Acute and Delayed
No significant symptoms expected from inhalation, skin contact, eye contact, or ingestion under normal conditions of use.
4.3 Indication of Immediate Medical Attention and Special Treatment
Symptomatic treatment. No specific antidote.
Section 5: Firefighting Measures
5.1 Extinguishing Media
- Suitable: Alcohol-resistant foam, carbon dioxide, dry chemical powder, water spray or mist.
- Unsuitable: No specific restrictions known.
5.2 Special Hazards Arising from the Substance or Mixture
In the event of fire, carbon monoxide, carbon dioxide, and other toxic gases may be released. Inhalation of hazardous decomposition (pyrolysis) products may cause serious health effects.
5.3 Advice for Firefighters
Wear self-contained breathing apparatus (SCBA) and full protective clothing. Use water spray to cool fire-exposed containers.
Section 6: Accidental Release Measures
6.1 Personal Precautions, Protective Equipment and Emergency Procedures
Refer to Sections 7 and 8 for handling precautions and personal protective equipment. Avoid generating dust. Ensure adequate ventilation.
6.2 Environmental Precautions
Not regarded as dangerous for the environment under normal use.
6.3 Methods and Materials for Containment and Cleaning Up
Collect spilled material mechanically into suitable containers. Dispose of collected material in accordance with Section 13.
Section 7: Handling and Storage
7.1 Precautions for Safe Handling
Take action to prevent static discharges. Do not inhale dust. Wash hands thoroughly after handling. Do not eat, drink, or smoke during use.
7.2 Conditions for Safe Storage, Including Any Incompatibilities
Store in tightly closed containers in a cool, dry, and well-ventilated area. Do not expose to direct sunlight. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Recommended storage temperature: +5°C to +30°C.
7.3 Specific End Uses
Microbiological product for agricultural, horticultural, and turf management applications.
Section 8: Exposure Controls/personal Protection
8.1 Control Parameters
No occupational exposure limits have been established for this mixture or its ingredients under Safe Work Australia Workplace Exposure Standards.
8.2 Exposure Controls
Do not eat, drink, or smoke during work. Wash hands thoroughly with soap and water after handling and before breaks.
| Eye/Face Protection: | Safety glasses or protective goggles where dust may be generated. |
| Skin Protection: | Protective workwear. Gloves recommended for prolonged handling. |
| Respiratory Protection: | Where dust is generated, use a particulate respirator (e.g. P2/N95). |
| Thermal Hazards: | Not applicable under normal conditions of use. |
| Environmental Controls: | No special environmental controls required. |
Section 9: Physical and Chemical Properties
9.1 Information on Basic Physical and Chemical Properties
| Appearance: | White powder/particulate solid |
| Odour: | Specific/characteristic |
| pH: | 6–8 (undiluted) |
| Melting Point: | 83–86°C |
| Boiling Point: | Data not available |
| Flash Point: | Data not available |
| Auto-ignition Temperature: | Data not available |
| Decomposition Temperature: | 146°C |
| Flammability: | Data not available |
| Explosive Limits: | Data not available |
| Vapour Pressure: | Data not available |
| Relative Density: | 0.73 g/cm³ |
| Solubility (Water): | Soluble |
| Partition Coefficient: | Data not available |
| Viscosity: | Not applicable (solid) |
9.2 Other Information
No additional information available.
Section 10: Stability and Reactivity
- 10.1 Reactivity: No specific reactivity hazards known.
- 10.2 Chemical Stability: The product is stable under normal conditions of use and storage.
- 10.3 Hazardous Reactions: No hazardous reactions known under normal conditions.
- 10.4 Conditions to Avoid: Protect against flames, sparks, overheating, and frost.
- 10.5 Incompatible Materials: Strong acids, strong bases, strong oxidising agents, disinfectants, biocides, and chemical pesticides.
- 10.6 Hazardous Decomposition: Carbon monoxide and carbon dioxide may form at high temperatures and during combustion.
Section 11: Toxicological Information
11.1 Information on Toxicological Effects
Acute Toxicity
| Route of Exposure | Parameter | Value | Species |
|---|---|---|---|
| Oral | LD50 | > 5,800 mg/kg | Mouse |
| Oral | LD50 | > 4,100 mg/kg | Rat |
| Dermal | LD50 | > 3,160 mg/kg | Rat |
| Inhalation | LD50 | > 5.84 mg/L air | Rat |
- Skin Corrosion/Irritation: Not classified.
- Serious Eye Damage: Not classified.
- Respiratory/Skin Sensitisation: Not classified.
- Germ Cell Mutagenicity: Not classified.
- Carcinogenicity: Not classified.
- Reproductive Toxicity: Not classified.
- STOT — Single Exposure: Not classified.
- STOT — Repeated Exposure: Not classified.
- Aspiration Hazard: Not classified.
Additional Information Prolonged contact with eyes, skin, and respiratory tract may cause mild irritation. The product is formulated using fungi specially selected from the natural environment that are known to be non-pathogenic to humans, animals, or plants. It is advised to cover open wounds when handling this product.
Section 12: Ecological Information
12.1 Toxicity
May be toxic to aquatic life.
| Parameter | Value | Species | Environment |
|---|---|---|---|
| LD50 | > 2.50 mg/L | Fish | Freshwater |
| LD50 | > 0.05 ppm | — | — |
- 12.2 Persistence/Degradability: The mixture is biodegradable.
- 12.3 Bioaccumulative Potential: Not available.
- 12.4 Mobility in Soil: Not available.
- 12.5 PBT and vPvB Assessment: Does not meet PBT or vPvB criteria.
- 12.6 Endocrine-Disrupting: Not available.
- 12.7 Other Adverse Effects: Not available.
Section 13: Disposal Considerations
13.1 Waste Treatment Methods
Dispose of contents and container in accordance with all applicable Australian federal, state, and territory legislation and local council regulations. Do not empty unused product into drains or waterways. Any unused product and contaminated packaging should be placed in labelled waste containers and submitted for disposal by an authorised waste management contractor. The product must not be disposed of with general municipal waste. Empty containers may be recycled where facilities exist.
Section 14: Transport Information
This product is not classified as a Dangerous Good under the Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG Code).
- 14.1 UN Number: Not applicable — not a dangerous good.
- 14.2 Proper Shipping Name: Not applicable.
- 14.3 Transport Hazard Class: Not applicable.
- 14.4 Packing Group: Not applicable.
- 14.5 Environmental Hazards: Not applicable.
- 14.6 Special Precautions: Refer to Sections 4 to 8 for handling precautions.
- 14.7 Bulk Transport (MARPOL): Not applicable.
Section 15: Regulatory Information
15.1 Safety, Health and Environmental Regulations Specific to the Product
This SDS has been prepared in accordance with the Australian Work Health and Safety (WHS) Regulations and the model Code of Practice for Preparation of Safety Data Sheets for Hazardous Chemicals, using GHS Revision 7.
- WHS Regulations: Work Health and Safety Act 2011 and Work Health and Safety Regulation 2011 (Cth and applicable state/territory).
- GHS Revision: Revision 7 (GHS 7), mandatory from 1 January 2023.
- AICIS Status: All ingredients are listed on the Australian Inventory of Industrial Chemicals (AIIC) or are exempt. Refer to AICIS for current listings.
- Poisons Schedule (SUSMP): Not scheduled under the Standard for the Uniform Scheduling of Medicines and Poisons.
- ADG Code: Not classified as a Dangerous Good for transport.
15.2 Chemical Safety Assessment
No chemical safety assessment has been carried out for this mixture.
Section 16: Other Information
| Date of Issue: | 8 April 2026 |
| Date of Last Review: | 8 April 2026 |
| Version: | 1.0 |
The product must not be used for purposes other than those specified in Section 1 unless specifically approved by Fernland Agencies Pty Ltd. The user is responsible for adherence to all applicable health, safety, and environmental regulations.
Key Abbreviations
| Abbreviation | Definition |
|---|---|
| ADG | Australian Code for the Transport of Dangerous Goods by Road and Rail |
| AICIS | Australian Industrial Chemicals Introduction Scheme |
| AIIC | Australian Inventory of Industrial Chemicals |
| CAS | Chemical Abstracts Service |
| GHS | Globally Harmonized System of Classification and Labelling of Chemicals |
| LD50 | Lethal dose at which 50% of the test population is expected to die |
| PBT | Persistent, Bioaccumulative, and Toxic |
| SCBA | Self-Contained Breathing Apparatus |
| STOT | Specific Target Organ Toxicity |
| SUSMP | Standard for the Uniform Scheduling of Medicines and Poisons |
| vPvB | Very Persistent and Very Bioaccumulative |
| WHS | Work Health and Safety |
Disclaimer This Safety Data Sheet is provided by Fernland Agencies Pty Ltd as the Australian importer/supplier. The information contained herein is based on data considered accurate at the date of issue and is provided in good faith. It should not be construed as a guarantee of the product’s suitability or performance for any particular application. Users should make their own assessment of the product’s suitability for their intended purpose and comply with all applicable legislation. This SDS must be reviewed at least every five years in accordance with the WHS Regulations.