---
title: Label - Envy
canonical: https://fernland.com.au/documents/1008/
dateModified: 2026-07-12 07:55:37
summary: Product Label
type: label
---

# Label - Envy

> Product Label

[Logo: AgroBest Nutritional Systems]
# ENVY

**DESCRIPTION**
Envy is a unique water emulsifiable polymer concentrate, which can be used on most trees, vegetables and flower crops. When dry, Envy forms a semi permeable, biodegradable film, which reduces transpiration and protects plants from climatic extremes.

**PRODUCT FEATURES**
* Envy can increase frost tolerance by as much as 4°C.
* Envy can reduce moisture losses through transpiration by up to 50%, reducing drought stresses and irrigation.
* Envy will not impede photosynthesis and normal plant growth.
* Envy is non-toxic, pH neutral and biodegradable.

**GENERAL APPLICATION RATES**

| FROST PROTECTION | | |
| :--- | :--- | :--- |
| **Use** | **Product** | **Application** |
| First Application | 5 % dilution, up to a maximum of 20L/Ha | Use sufficient water to ensure complete coverage. |
| Second Application | 3 % dilution, up to a | |

| PRE-HARVEST TO REDUCE FRUIT DROP AND SUNBURN | | |
| :--- | :--- | :--- |
| **Product** | **Water** | **Application** |
| 10L/Ha | Minimum 250-1000L | Use sufficient water to ensure complete coverage. |
| 1% of water volume | 1000-2000L | |

See overleaf for application rates for specific crops.

**COMPATIBILITY**
Do NOT combine with any other pesticide or fertilizer in spray tank.

**APPLICATION**
All anti-transparent spray applications must be applied for full coverage or used as a dip.
Envy should not be applied during flowering as it can create a barrier to pollination. Envy should be applied 24 hours before adverse weather conditions. Apply when there is sufficient daylight time to dry, minimum 4 hours of sunlight. Foliar fertilizers and pesticides should be applied prior to an application of Envy or 2 weeks after application, as Envy may inhibit absorption of some systemic products. Avoid foliar application when ambient air temperature exceeds 35 degrees Celsius.

**Before Use:** Use only when water and air temperatures are above 5°C.
Ensure equipment is thoroughly rinsed.

**Mixing:** Water must be of good quality or coagulation of Envy may occur. Wetting agent should not be necessary. Agral 600 or similar may be used if required. Avoid foaming by adding Envy to spray tank after water has been added.

**Spraying:** Apply in high volume with small droplet size recommended, spray to run off to achieve full coverage. All surfaces must have coverage.

**Clean Up:** Rinse well with water immediately. Dried Envy may be removed from machinery with a diluted ammonia solution e.g. 2-5% w/v. Ensure equipment is thoroughly rinsed after use.

**Shelf Life:** Envy may be stored, undiluted, for up to five years in a sealed container away from heat and light.

**Withholding Period:** Envy has no withholding period.

**SIZES**
Envy is available in five sizes:
500ml, 1 Litre, 5 Litre, 20 Litre, 200 Litre, 1000L

***

[Logo: AgroBest Nutritional Systems]
# ENVY

| USE | PRODUCT | APPLICATION |
| :--- | :--- | :--- |
| **Winter Protection -** | | **To reduce winter damage caused by frost and cold desiccation.** |
| Apples | 2.5L/100L | 1st spray apply after petal fall and fruit set, 2nd spray 21 days later. Max- |
| Citrus | 1L/100L | 2000L water/Ha Early Winter for frost protection from scarring and marking. |
| Fruit Trees | 2L/100L | Early Spring for bud protection. Spray after petal fall. |
| Vegetables | 2.5L/100L | Early Spring/Autumn to reduce winter damage. |
| Vines | 5L/100L, 2.5L/100L | Apply early Spring, 5 days after bud burst to reduce winter damage. To protect new growth spray again in 7, 10 and 14 days. |
| Nut Trees | 2.5L/100L | Early autumn for frost protection. Repeat after fruit set and 30 days before harvest. |
| Tree Plantations | 2L/100L | Wet all foliage as protection against frosts and dry out for established plantings. |
| Cotton | 2L/100L | Min 100L/Ha spray 1st application at 1st flower, 2nd application 21 to 28 days later. |
| | | **To reduce transplanting shock and other uses.** |
| Transplants | 5-10L/100L | Water well 24 hours before transplant. Thoroughly saturate seedlings. |
| Bedding Plants | 5L/100L | For frost and wilt stress spray before hardening off or transplanting. Spray before transportation to reduce damage. |
| Flowering Plants | 5L/100L | Spray for transportation protection. Reduced wilt and extended flowering time. |
| Indoor Foliage | 5L/100L | Spray for extend maintenance and leaf gloss. |
| Turf Transplants | 5-10L/100L | Apply after watering and before lifting. |
| Deflasking | 100ml/10L | Spray or dip plants when deflasking |

AGROBEST AUSTRALIA PTY.LTD. 9 Palings Court, Nerang Qld 4211

[Logo: AMCA Australian Made]